7.
Place the sheet faceup in the Automatic Document Feeder (ADF). Make sure the sheet is
oriented with the leading edge band to the left, as shown.
8.
Press Start.
9.
Repeat steps 7 and 8.
10.
Place the sheet facedown in the ADF. Make sure the sheet is oriented with the leading edge
band to the left, as shown.
11.
Press Start.
12.
Repeat steps 10 and 11.
13.
Remove the sheet.
If the calibration process was successful, the screen on the scanner displays Successful. Turn the
power off and on.
If the calibration process failed, the screen displays Failure. Turn the power off and on. Repeat the
scanner calibration.
4036-402
3-3
Repair information