Ricoh Aficio MP 2000 Scanner Reference page 107

A
Press [Options].
B
Press the {U} or {T} key to select [Stamp], and then press the {OK} key.
C
Select [On], and then press the {OK} key.
"Programmed" appears, and then the Send Options screen reappears.
D
Press the {Escape} key.
Note
❒ [Stamp] appears only if the ADF/ARDF is installed.
❒ Stamping may continue even if scanning is interrupted, depending on the
cause of interruption.
❒ Replace the stamp cartridge when Stamp begins to fade. For details, see
Troubleshooting.
Specifying Send Options
5
101