Specifying The Pop3 Server Address - Konica Minolta bizhub 160 User Manual

3

Specifying the POP3 server address

1
Press the [Utility] key.
The Utility mode menu appears.
2
Press the + or , key until
SETTING 2
3
Press the [1] key on the 10-key pad
to select
4
Enter the IP address or host name of
the POP3 server.
– For information on entering text,
refer to "Entering text characters"
on page 2-11.
– Up to 64 characters can be entered for the host name.
– The DNS settings must have been specified before the host name
for the POP3 server can be specified.
– The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
5
Press the [Yes] key.
The e-mail setting 2 screen appears.
3-22
E-MAIL
appears.
POP3 SERVER.
Getting ready
[ ]
SU-502