Leer LATITUDE 630286 Installation Instructions & Owner's Manual

Easy install, soft tri-fold truck bed tonneau cover

Advertisement

Quick Links

WITH LEER'S EXCLUSIVE
INSTALLATION INSTRUCTIONS &
Thank you for purchasing the LEER
to make it better, front to back and inside out. We engineered components with new innovations at every
point including our CYNC™ latching system (patented). The result is a tri-fold that's unlike any cover on
the road today.
NOTICE TO INSTALLER: It is recommended you take time to read these instructions before installing the
cover even if already familiar with the product. Improvements are often made without prior notice. Al-
ways handle the cover and components with care to avoid damage. If you find a part missing or defective,
or if you have trouble installing this product, please have the model number ready (located on a tag under
the first panel) and call your dealer. When done, these instructions and warranty information must be giv-
en to the customer to keep.
NOTICE TO CUSTOMER: Before using this product, read the operating instructions, maintenance and
safety sections of this owner's manual and save for future reference. Your new LEER tonneau must be
registered to make the warranty valid. Registration information can be found on the back page.
FOR YOUR RECORDS
1
OWNER'S MANUAL
R
LATITUDE™ soft tri-fold tonneau cover. At LEER, we looked at ways
DATE PURCHASED:___________________________________
SERIAL NUMBER:_____________________________________
LEER RETAILER:______________________________________

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LATITUDE 630286 and is the answer not in the manual?

Questions and answers

Summary of Contents for Leer LATITUDE 630286

  • Page 1 NOTICE TO CUSTOMER: Before using this product, read the operating instructions, maintenance and safety sections of this owner’s manual and save for future reference. Your new LEER tonneau must be registered to make the warranty valid. Registration information can be found on the back page.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Master Carton Components ..............2 Hardware Box Contents ................2 Pre-Preparation ..................3 Initial Placement ..................3 Initial Positioning ..................3 Securing the Door ..................4 Packaged Components ................5 Anchoring the Front Panel ................5 Secondary Clamps with Security Buckles ............ 5 Installing the Rear Latching System ............
  • Page 3: Pre-Preparation

    INSTALLATION INSTRUCTIONS NOTE: SHOWN WITH CLAMPS INSTALLED FOR CLARITY INITIAL PLACEMENT PLACE TRUCK COVER OVER CAB END OF TRUCK BOX WASH TRUCK BOX IF DIRTY INITIAL POSITIONING UNFOLD THE COVER AND ADJUST POSITION OVER THE TRUCK BED FOR PROPER CAB/ TAIL ALIGNMENT...
  • Page 4: Securing The Door

    INSTALLATION INSTRUCTIONS LINE UP FRONT POSITION & LINE UP SIDE TO SIDE SECURING THE COVER CAREFULLY REFOLD WITHOUT SHIFTING COVER’S POSITION ON THE TRUCK BED NOTE: SHOWN WITH CLAMPS INSTALLED FOR CLARITY...
  • Page 5: Packaged Components

    INSTALLATION INSTRUCTIONS ANCHORING THE FRONT PANEL SELECT INSERT THAT BEST ALIGNS CLAMP TO SIDE OF THE BED NOTE: STANDARD FRONT CLAMP INSTALLTION SHOWN. SEE INSTRUCTIONS IN CLAMP KIT FOR ASSEMBLY CLAMP WILL SWIVEL SIDE TO SIDE ENSURE CLAMP IS POSITIONED UNDER BED WALL FLANGE.
  • Page 6: Installing The Rear Latching System

    INSTALLATION INSTRUCTIONS INSTALLING THE REAR LATCHING SYSTEM WITH FRONT CLAMPS SECURE, COMPLETELY CLOSE THE COVER. INSTALLING THE REAR STRIKE PLATE INSTALL REAR CLAMPS STEP 1: PLACE CLAMP UNDER BED RAIL AS SHOWN. TIGHTEN FLOWER NUT AS SHOWN BY HAND UNTIL CONTACT IS MADE.
  • Page 7: Adjusting The Strike Plate

    INSTALLATION INSTRUCTIONS ADJUSTING THE STRIKE PLATE ADJUSTING THE CYNC LATCH TO ADJUST THE CYNC LATCHING SYSTEM. ADJUST ONE SIDE AT A TIME. MAKE SURE THE OTHER SIDE IS TIGHTENED DOWN. 1. LOOSEN BOTH SET SCREWS ON ONE SIDE. 2. SLIDE CYNC LATCHING SYTEM CATCH TO OVERLAP STRIKER PLATE BY 1/2”.
  • Page 8: Securing An Open Cover For Travel

    INSTALLATION INSTRUCTIONS SECURING AN OPEN COVER FOR TRAVEL IMPORTANT NOTICE WHILE DRIVING, COVER MUST BE COMPLETELY FLAT AND SECURED WITH ALL CLAMPS SECURELY FASTENED. DO NOT DRIVE WITH COVER IN PARTIALLY OPEN POSITION. FOLD THE COVER FOR- WARD AND FASTEN BOTH STRAPS IN THE MIDDLE SECTION TO THE FRONT RAIL CLIPS.
  • Page 9: Replacement Parts

    REPLACEMENT PARTS IDENTIFIER DESCRIPTION QUANTITY ITEM NUMBER Latitude NF13 (2013+ Nissan Frontier ) Clamp Kit 1 EACH 203983 Latitude Angle Clamp Kit 1 EACH 204320 Latitude GC15 (2015+ GM Colorado/Canyon) Clamp Kit 1 EACH 204322 Latitude GS14 (2014+ GM Silverado/Sierra ) Clamp Kit 1 EACH 204323 Latitude Toyota Clamp Kit...
  • Page 10: Clamp Applications

    CLAMP APPLICATIONS TRUCK DESCRIPTION Clamp Kit 56FF15 2015+ Ford F150 5’6” 204320 66FF15 2015+ Ford F150 6’6” 204320 58GS14 2014+ GM Silverado/Sierra 5’8” 204323 66GS14 2014+ GM Silverado/Sierra 6’6” 204323 57DR09 2009+ Dodge Ram 5’7” 204320 64DR09 2009+ Dodge Ram 6’4” 204320 52GC15 2015+ GM Colorado/Canyon 5’2”...
  • Page 11: Quick Start Guide

    QUICK START-UP GUIDE IMPORTANT NOTICE WHILE DRIVING, COVER MUST BE COMPLETELY FLAT AND SECURED WITH ALL CLAMPS SECURELY FASTENED. DO NOT DRIVE WITH COVER IN PARTIALLY OPEN POSITION.
  • Page 12: Warranty And Maintenance

    The warranty will void if the product has been damaged by accident, neglect, abuse, inappropri- ate use, improper installation or acts of God. LEER may, at our sole discretion, either repair or replace products that prove to be defective.

This manual is also suitable for:

Latitude 630170Latitude 630300Latitude 630105Latitude 630112

Table of Contents