Channel Swap - COMPRO W800F - START UP GUIDE Manual

Channel Swap

To swap the channel numbers, please select Channel Swap from the menu
then select YES, and it will show as a sub menu. Once you have entered this
menu, you will see a list of channels. You may browse with the direction keys;
Up and Down are going through the list while Left and Right are changing
pages of the list. Select the channel number that you wish to swap and press
OK, and then enter the number of the channel that you wish to switch.
To reset to the original channel numbers, please rescan the channel table
again by selecting Auto Scan in the menu.
My Favorite Channel List
My favorite channel list can store up to 10 channels that you watch the most
and browse with "Fav. Up" and "Fav. Down" keys on the remote control.
To add channels to the favorite list, please turn to the channel you wish to add
and press "Set Fav" on the remote control. Press "OK" on the selected
position.
PIP (Picture In Picture)
You can start PIP function by clicking "PIP"
button on the remote control. It allows you
to watch TV on the Windows desktop.
When PIP is working, press "PIP" button
again will change the size of the TV screen;
you may zoom twice and the third time you
press "PIP", it will close the PIP function.
The PIP feature can supports up to 1680 x 1050 windows' resolution.
Note:
If you need to move the TV screen position on Windows desktop, please press
the "OK" to switch the keys of channel and volume up/down into direction key,
and you can move the PIP TV windows to the place you want.
18