Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Merax WF312196
Summary of Contents for Merax WF312196
- Page 1 153*203 ASSEMBLY INSTRUCTION SKU:WF312196 + WF312197...
-
Page 2: Detail View
Detail View... -
Page 3: Part List
Part List WF312196 Pillow core-2pcs Head board-1pc Side head board-2pcs Pillowcase-2pcs Hardware List + Part list WF312197 Siderails-2pcs Foot board-1pc Head board cross bar-1pc Center support bar-1pc Middle support leg-3pcs Leg support bar-2pcs Leg-2pcs Slats -12pcs... -
Page 4: Hardware List
Hardware List Ø8*40mm Nuts Bolts(15pcs) (4pcs) Allen Key(1pc) Ø8*18mm 86*32*28*2mm 77*33**33*2mm (4pcs) "7" Connector(4pcs) Bolts(36pcs) Center support bar fittings 20*6mm Ø3*16mm Nails Spanner(1pc) Buckle(16pcs) (36pcs) LED(1pc) Senso(2pcs) Led power adapter(1pc) Sensor cable(1pc) Power cable(1pc) - Page 5 Attention: Do not tighten the screws before completing the entire installation If you have any difficulty with the installation process, please feel free to contact us. Step 1 x2 Fix the Side head board to the Headboard with Bolts B by using Allen key A. B Bolts x 4 A Allen Key M8X40mm...
- Page 6 Step 4 Fix the Siderail to the side headboard and foot board with Bolts D and "7" Connector F by using Allen key A. Please notice that don't install all the screws,just install 80% of them. F "7" Connector x 4 Allen Key D Bolts x 16 M8X18mm Step 5...
- Page 7 Step 7 Fix the Center support bar fittings E to the Headboard cross bar and foot board with Bolts D by using Allen key A E Center support bar fittings x2 Allen Key D Bolts x 4 M8X18mm Step 8 Fix the middle support leg to the center support bar with Bolts B by using Allen key A.
- Page 8 Step 10 Fix the Senso K to the siderails with Nails H by using Allen key or Electric drill.The position of the Senso is 12"-20"from the headboard.You can adjust the position of your feet when you usually get out of the bed. Nails K Senso x 2 Allen Key...
- Page 9 Step 12 Connect LED J to the Senso K,please notice that put LED J into out+ and put the Sensor cable M into in+,then connect the Sensor cable M to the Led power adapter L. (LED) L Led power adapter x1 M Sensor cable x1 Step 13 Fix the slats to the side rails.
- Page 10 Step 15 Put the Pillow core into Pillowcase ,then stick the pillow to the headboard. Step 16 Connect the Socket line to the Power cable N and connect the power supply.At last connect the Led power adapter L to the Socket under the headboard,then assembled is finished and please enjoy your bed. N Power cable x1...
-
Page 11: Installation Instructions
MOTION SENSOR SWITCH INSTALLATION INSTRUCTIONS LED Lights Motion/Light light ON time delay Sensor from 15S to 5 min Motion sensor ONLY ON (can be used in direct light) DC 5-24V Power Cord Motion Sensor and photo Eye on (must be used in indirect light or darkness) 1.
Need help?
Do you have a question about the WF312196 and is the answer not in the manual?
Questions and answers