COMPRO V600 - START UP GUIDE Manual page 9

OSD Menu Guide
Menu button will open up OSD Menu, please use the direction key to navigate.
(Picture)
Brightness
Contrast
Saturation
Sharpness
Hue
Y/C Sep. Mode
Presets
(Picture)
Input Signal Select Air or Cable for TV input signal type. Default is Air
Channel
Set a name for specific channel. (5 letter/numbers)
Rename
Fine tune Fine tune frequency if TV is unclear. (0~100) default is 50
Auto Scan Recommend to use Auto Scan for the first time. (NO/YES)
Channel Swap Swap the channel numbers to your preference. (NO/YES)
CH Add/Erase Add or Erase channel.
Channel Video Change video standard for current channel.
System Default by different countries
(Picture)
Resolution
Refresh Rate
Noise Reduction Adjust level of noise reduction. (0~8) Default is 4
Display Type
Input Source
(TV) (Monitor)
Adjust the brightness (0~100) Default : 50
Adjust the Contrast (0~100)
Adjust the Saturation (0~100)
Adjust the Sharpness (0~15)
Adjust the Hue ( 0~100)
Choose between 2D/3D mode
3 modes of picture settings (Standard/Game/Cinema)
(TV) (Monitor)
(TV) (Monitor)
640*480 800*600
1280*1024 1400*1050
1680*1050
60Hz (default) 75Hz
LCD (default)
TV Composite SV (S-Video) YCbCr (Component) PC
(OSD)
Default : 50
Default : 50
Default : 0
Default : 50
Default : 3D Mode
(OSD)
(OSD)
1024*768 (default) 1280*720
1440*900
CRT PDP
(Sound)
(Sound)
(Sound)
1600*1200
7