Signature Hardware 357944 Installation

Resin vessel sink

Download this manual

RESIN VESSEL SINK INSTALLATION

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing bathroom ﬁxtures and plumb-

ing. Signature Hardware accepts no liability for any

damage to the ﬂoor, walls, plumbing, vanity cabinet, sink,

counter top, or personal injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the sink for damage. If any damage

is found, contact our Customer Relations team at

1-866-855-2284.

GETTING STARTED

Ensure that you have gathered all the required

materials that are needed for the installation.

For the following instructions, it is assumed that the

vanity and countertop are already in place.

TOOLS AND MATERIALS:

Silicone Sealant

Damp Cloth

(100% Neutral

Cure)

Resin Vessel Sink Installation Instructions

Need help?

Do you have a question about the 357944 and is the answer not in the manual?

Page 1 TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom ﬁxtures and plumb- ing. Signature Hardware accepts no liability for any damage to the ﬂoor, walls, plumbing, vanity cabinet, sink, Silicone Sealant Damp Cloth counter top, or personal injury during installation.
Page 2 RESIN VESSEL SINK INSTALLATION Installation 1. Carefully place your vessel sink upside down on the 3. If desired, apply a continuous bead of silicone sealant counter top. Apply a generous amount of silicone around the perimeter of the sink base for additional sealant to the base of the sink where it will rest on the stability.
Page 3 RESIN VESSEL SINK INSTALLATION 5. Proceed to the installation of the sink drain. Refer to 6. Allow the sealant to fully dry for 24 hours. the drain’s installation instructions for guidance. 24 hr Cleaning and Maintenence Resin has a nonporous surface that makes it resistant to stains, scratches and discoloration. To maintain the condition of your new resin sink, simply wipe the surface with a dry, soft cloth after each use.