COMPRO V550 - START UP GUIDE Manual page 9

(Picture)
Input Signal Select Air or Cable for TV input signal type. Default is Air
Channel
Set a name for specific channel. (5 letter/numbers)
Rename
Fine tune Fine tune frequency if TV is unclear. (0~100) default is 50
Auto Scan Recommend to use Auto Scan for the first time. (NO/YES)
Channel Swap Swap the channel numbers to your preference. (NO/YES)
CH Add/Erase Add or Erase channel.
Channel Video Change video standard for current channel.
System PAL (B/G, D/K, I) SECAM (B/G, D/K) Default is SECAM D/K
(Picture)
Resolution
Refresh Rate
Noise Reduction Adjust level of noise reduction. (0~8) Default is 4
Display Type
Input Source
(Picture)
OSD Position
OSDTransparency 1
Language
Reset All Settings NO/YES
Information
Country/Region
(Picture)
Volume
Treble
Bass
Loudness
Reset
(TV) (Monitor)
(TV) (Monitor)
640*480 800*600
1280*1024 1440*990
60Hz (default) 75Hz
LCD (default)
TV Composite SV (S-Video) YCbCr (Component) PC
(TV) (Monitor)
Press OK key, use direction keys to move OSD position
2 3 4
Select your language (Default language is Russian)
(1 Cancel / 2 Reset All Settings)
VideoMate V550 Version information
Select your country or region (Default country is Russia)
(TV) (Monitor)
Adjust volume (0-50)
Adjust Treble volume (0-15)
Adjust Bass volume (0-15)
ON (enlarge the amplifier) / OFF (original signal)
Reset sound settings (NO/YES)
(OSD)
(OSD)
1024*768 (default) 1280*720
1600*1200
CRT PDP
(OSD)
(OSD)
(Sound)
(Sound)
(Sound)
(Sound)
7