COMPRO V150 - START UP GUIDE Manual page 10

OSD Menu Guide
Menu button will open up OSD Menu, please use the direction key to navigate.
(Picture)
Brightness
Contrast
Saturation
Sharpness
Hue
OptiColor Mode
(Picture)
Input Signal Select Air or Cable for TV input signal type. Default is Air
Channel
Set a name for specific channel. (5 letter/numbers)
Rename
Fine tune Fine tune frequency if TV is unclear. (0~100) default is 50
Auto Scan Recommend to use Auto Scan for the first time. (NO/YES)
Channel Swap Swap the channel numbers to your preference. (NO/YES)
CH Add/Erase Add or Erase channel. (Default: Add)
Channel Video Change video standard for current channel.
System (Only appears in countries with 2 or multiple TV systems)
FM Mode: While listen to FM radio, this OSD page will different with TV mode.
(Picture)
Auto Scan Recommend to use Auto Scan for the first time. (NO/YES)
Directly input the channel frequency you want to listen. And
Enter Frequency
you can use the CH Add/Erase to save it.
CH Add/Erase Add or Erase channel. (Default: Add)
Channel
Set a name for specific channel. (5 letter/numbers)
Rename
10
(TV) (Monitor)
Adjust the brightness (0~100)
Adjust the Contrast (0~100)
Adjust the Saturation (0~100)
Adjust the Sharpness (0~15)
Adjust the Hue ( 0~100)
3 preset modes (Standard/TV, Game, and Cinema) and 5
custom modes of picture settings. You can adjust the color
settings then save it in custom mode.
(TV) (Monitor)
(FM) (Monitor)
(OSD) (Sound)
(OSD) (Sound)
(OSD) (Sound)