K&H 100213593 Care Instructions

EZ Mount Kitty Sill Deluxe with Bolster
Care & Instructions
Thank you for purchasing the EZ Mount Kitty Sill Deluxe with Bolster designed by
K&H Pet Products. When used correctly, your kitty sill should provide years of hassle-free
EZ Mount Kitty Sill Deluxe with Bolster
Remove all pieces from the box and lay out on a table. Included in the box are 2
1
suction cups, 2 stability rods, frame and cover. See Figure 1.
2
Turn the frame and cover upside down on the table. Detach the hook and loop
completing the assembly of the EZ Mount Kitty Sill Deluxe with Bolster.
Install both stability rods into the plastic joints and push together your frame until it
3
is taut. See Figure 3. Re-attach the hook and loop material by folding over the
around all edges of the frame until the cover is nice and tight on the frame.
4
Turn cover and frame over to top side and install the suction cups onto the frame.
It may require some turning and pushing. These are meant to be tight and should
be installed onto corners of the unit for safety and stability. See Figure 4.
Figure 3
INSTALLING THE BOLSTER ONTO THE FRAME:
1 Lay your kitty sill frame right side up and lay the bolster on top so that it overlaps
the edges of the frame. At this time, decide which direction you want the back of
the bolster to face. Once installed it can either rest against the window or sit on the
opposite back edge of the kitty sill.
2
Next, run the hook and loop straps located on each of the 4 corners of the bolster
through the corners of the kitty sill frame. See Figure 5. Secure each hook and
loop strap snuggly to the metal frame until the bolster is securely attached.
comfort and window viewing pleasure for your cat.
ASSEMBLY OF YOUR
Figure 2. You will now be installing the stability rods and
Continued on other side. . .
Figure 4
Made in China
K&H Pet Products, Central Garden & Pet
Colorado Springs, CO
www.khpet.com | (719) 591-6950
Figure 1
hook and loop material to hold
frame.
Figure 2
Figure 5
REV1_03-17-20