Software Installation - COMPRO T500F - STARTUP Manual

Software Installation

After installing the PCI card and cables in your computer, you should restart it
and follow these steps to install the software.
Step 1. After restarting, Windows will detect your VideoMate T500F PCI card
and start the Add/Remove Hardware Wizard, prompting you to install
the VideoMate T500F PCI card drivers. Please press Cancel and go
to the next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is diabled,
double-click on "setup.exe" on the installation CD.) You can choose
Complete to install all necessary software (VideoMate T500F drivers,
ComproDTV 4, ComproFM 2) or choose Custom to install selected
item by item. (We also provide the DiecrtX 9 and Acrobat Reader 6.0
software on the installation CD; you can browse the CD folder and
install them by your need.
Step 3. Press Next to install ComproDTV 4, Windows Media Format 9 Series
Runtime
Step 4. After each program is successfully installed, press Finish to proceed.
Step 5. When installation completes, press Finish to restart computer.
Step 6. When computer is restarted, please start up ComproDTV 4. Select
"VideoMate TV
for the country selection and then press OK.
Step 7. It will ask you if you want to scan channels. Please select OK then
select either one to start scanning. After channel scan is finished,
please press "Apply" first if you want to continue scan for other type of
signal. Press OK and you are ready to enjoy.
Capture" for Video Device. Also choose your country
9