Nuvo 60-5675 Assembly And Mounting Instructions

ASSEMBLY AND MOUNTING INSTRUCTIONS
60-5675
Please read the Assembly lnstruction sheet carefully before proceeding. Carefully
unpack and identify all parts prior to building the unit. Each part is identified on the
drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you
must return the item for any reason. Please repack the unit using the original carton
and inserts.
STEP 1:Unpack all the parts and classify them
according to the illustration shown at the side.
Place the parts on a scratch free surface.
STEP 2: Install the glass panels into the frame
and fix it using the clips.
STEP 3: lnstall the correct bulbs (not provided).
Nipple
STEP 4: Secure the roof to the hickey using the
final.
STEP 5: Make sure the power is turned off at the
main power cable where the fixture is to be
installed. Use the wire nuts to connect the
positive and neutral wires, connect the ground
wire to the junction box ground port.
STEP 6: Secure the fixture to the post fitter using
the screws.
Turn on the power at fuse or circuit box.