Advertisement
Quick Links
NOTE:
Please consult a qualified electrician if you are not certain of the installation.
CAUTION:
Before starting the installation, disconnect the power by turning off the circuit breaker or by
removing the fuse in the fuse box.
1.
Open the part bag, then pull the power supply wires out from the post and the fixture wires out from
the fixture body, and attach the wires together by connecting black to black and white to white.
Attached the power supply ground wire to the fixture ground wire. Cover connection using wire
connector.
2.
Secure the fixture body to the post using the fasten screws provided（three Pcs）.
3.
Install the bulb (not included).
4.
Place the six pieces glass and attach into fixture body. Use the screws and rubber washers provided to
attach the top cover onto fixture body.
ASSEMBLY INSTRUCTION
SKU#60/994/995/996
A Satco Product
Advertisement
Related Manuals for Nuvo 60/994
Summary of Contents for Nuvo 60/994
- Page 1 ASSEMBLY INSTRUCTION SKU#60/994/995/996 NOTE: Please consult a qualified electrician if you are not certain of the installation. CAUTION: Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the fuse in the fuse box.
- Page 2 INSTRUCCIÓN DE ASAMBLEA SKU#60/994/995/996 NOTE : Por favor, consulte con un electrcista cafificado en caso de que no esté seguro de la instalación. CAUCIÓN : Antes de comenzar la instalación, cortar la electricidad mediante apagar el cortacircuitos o quitar el fusible desde la caja de fusible.
Need help?
Do you have a question about the 60/994 and is the answer not in the manual?
Questions and answers