Download
Share
Print this page
  1. Manuals
  2. Brands
  3. roomfitters Manuals
  4. Indoor Furnishing
  5. FOMO-CRDZ-002-V1
  6. Assembly intruction

roomfitters FOMO-CRDZ-002-V1 Assembly Intruction

2-doors cabinet
Hide thumbs

Advertisement

Quick Links

Download this manual
FOMO-CRDZ-002-V1
2-Doors Cabinet

Advertisement

loading
Need help?

Need help?

Do you have a question about the FOMO-CRDZ-002-V1 and is the answer not in the manual?

Questions and answers

Related Manuals for roomfitters FOMO-CRDZ-002-V1

Summary of Contents for roomfitters FOMO-CRDZ-002-V1

  • Page 1 FOMO-CRDZ-002-V1 2-Doors Cabinet...
  • Page 2 THE PRODUCT MAY RECOMMENDED ASSEMBLING BY MORE THAN ONE PERSON. PLEASE ASK FOR ASSISTANCE AT YOUR CONVENIENCE BEFORE ASSEMBLING.

  • Page 3: Before You Start

    Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.

  • Page 4: Parts Identification

    Parts Identification...
  • Page 5 MOVABLE SHELVES x 2 BOTTOM MIDDLE SHELF RIGHT LEFT BACK PANEL LEFT DOOR RIGHT DOOR...
  • Page 6 RIGHT AND LEFT RAILS x 2 END x 2 SCREWDRIVER...
  • Page 8 Assemble screws Make sure screws are (part#3) verticality lock up evenly on board x 13 x 22...
  • Page 9 Proper orientation of CAM LOCK...
  • Page 11 NOTE:THEL-SHAPE BRACKET SHOULD INSERTED INTO THE METAL TUBE...
  • Page 12 NOTE:THEL-SHAPE BRACKET SHOULD INSERTED INTO THE METAL TUBE...
  • Page 13 x 16...
  • Page 16 Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach thetip-over restraints to the unit and the wall. NOTE:The tipping restraint hardware included is for drywall construction. It will be necessary to drill holes for the wall anchors. Depending upon your wall construction, different anchor hardware mayberequired. Please contact your local hardware store for assistance.
  • Page 18 YOU CAN MAKE GAP ADJUSTMENT WHEN DOORS DOES NOT OPEN CORRECTLY OR SMOOTHLY BY POP OUT THE EJECTOR PIN AND ROATE IT OUT TO THE PROPER LENGTH.
  • Page 19 Safty Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging，instability，product collapse，and/or serious injury. WARNING Please make sure that all objects are removed before moving the assembled unit. The unit must be team lifted, not dragged or pushed. Failure to do so could cause instability, product collapse, and/or serious injury.