Page 4
Parts Identification TOP PANEL SHELF PANEL SIDE END x 2 SUPPORT ROD x 4 LOWER SUPPORT ROD x 2 Hard are Identification 1/4"x 9 mm 1/4"x22mm BOLT WRENCH BOLT QTY: 12+1 SPARE QTY: 20+1 SPARE QTY: 1 Page 2...
Page 5
Step √ NOTE: THE L-SHAPE BRACKET SHOULD INSERTED INTO THE METAL TUBE Step ATTENTION: ALL THE L-SHAPE BRACKETS ON THIS FRAME NEED TO INSERT INTO THE METAL TUBE SIMULTANEOUSLY √ NOTE: THE L-SHAPE BRACKET SHOULD INSERTED INTO THE METAL TUBE...
Page 7
Step 5 Step 1/4"x22mm x 10 Safty Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging,instability,product collapse,and/or serious injury.
Need help?
Do you have a question about the IE-CT-002G-V3 and is the answer not in the manual?
Questions and answers