1. Locate 6 screws in hardware package.
2. Install them into firebox as shown in Figure 1.
4. Use the same method for the top trim piece, but make sure the 45° angle is facing the front of the
unit when inserted into the left and right trim piece channels.
TK-32 Trim Kit
Installation Instructions
Figure 1
3. Install the left and right trim pieces to the fire-
box by snapping them over the screws installed
in step 2.
Figure 3
ProCom Heating, Inc.
Bowling Green, KY 42101
www.usaprocom.com
1-866-573-0674
Figure 2
200100-01
Rev A
10/13
Need help?
Do you have a question about the TK-32 and is the answer not in the manual?
Questions and answers