Advertisement
Quick Links
Advertisement
Related Manuals for Hommpa HPA34
Summary of Contents for Hommpa HPA34
- Page 1 ASSEMBLY INSTRUCTIONS 1 OF 14...
-
Page 2: Board Identification
BOARD IDENTIFICATION 2 OF 14... - Page 3 BOARD IDENTIFICATION LEFT SIDE PANEL PANEL BOTTOM PLATE QTY:1 QTY:1 QTY:1 RIGHT MIDDLE RISER RIGHT SIDE PANE LEFT MIDDLE RISER QTY:1 QTY:1 QTY:1 MIDDLE GLASS UPPER DECORATIVE LEFT AND RIGHT GLASS STRIP QTY:4 QTY:1 QTY:1 3 OF 14...
- Page 4 BOARD IDENTIFICATION LEFT BACK PANEL RIGHT DECORATIVE STRIPS QTY:4 DECORATIVE STRIPS QTY:1 QTY:1 IRON PIPELEG MIDDLE LEG BACK PANEL QTY:2 QTY:1 QTY:2 HORIZONTAL IRON PIPE INTERMEDIATE IRON PIPE QTY:2 QTY:2 3 OF 14...
- Page 5 SCREW CAM BOLT FOOT CAM LOCK F7*32 F15*11 F6*35 SCREW WOOD DOWEL GLASS CLIP SCREW F8*30 F5*25 F3*14 F6*30 SCREW LIGHT STRP STICKERS ALLEN WRENCH F4.5*40 4 OF 14...
- Page 6 STEP 1 - Screw cam bolts (A) into panel (1&2） as below shown. (Attention: Cam bolt & Insert nut need to be put together) STEP 2 - Insert wood dowels (E) into panel (3&4&5&6&9&10&11). 5 OF 14...
- Page 7 STEP 3 -Connect the board (10&11) to (4&5) with screws (I). STEP 4 -Attach panel (3&4&5&6) to (2) and lock with cam locks (B). 6 OF 14...
- Page 8 STEP 5 -Connect the boards (9) and (10&11) with wood dowels. STEP 6 -Attach panel (1) to (3&4&5&6) and lock with cam locks (B). 7 OF 14...
- Page 9 STEP 7 -Screw glass clip (F) into panel(3&4&5&6) as below shown. STEP 8 - Insert the glass (8) into the glass clip (F) and tighten it, as shown below. 8 OF 14...
- Page 10 STEP 9 -Rotating cabinet Attach panel (12&13) to (1&2&3&4&5&6)and lock with screws (H). STEP 10 -Connect the iron pipes (15) and (17) with screws (C). 9 OF 14...
- Page 11 STEP 11 -Connect the iron pipes (16) and (17) with screws (C). -Connect the iron pipes (14) and (16) with screws (C). STEP 12 -Connect the whole iron foot to the board (2) with screws (G). 10 OF 14...
- Page 12 STEP 13 -Connect the board (9) to (1) with screws (I). -Install the adjusting feet into iron parts (14) and (15). STEP 14 -Insert the glass (7) into the glass clip (F) and tighten it, as shown below. 11 OF 14...
- Page 13 STEP 15 -Connected pin of LED and power adapter to the RGB control box as below. -Remove the battery protection pad from remote controller; Align romote controller to the RGB Control box to adjust the color mode;Specifications of battery:cr2025 3v -LED lamp with effective remote control distance of 5 meters STEP 16 -Put the sticker (L) on the cam lock.
- Page 14 STEP 17 -Remove the screws of the fixing plate (13), and remove the plate (13). STEP 18 -Take out the middle glass (8). 13 OF 14...
- Page 15 STEP 19 -Carefully lift the fireplace insert to the back of the fireplaceThe unit and the fireplace are inserted into the center of the opening. -Connect the fireplace to the board (9&10&11) with screws（H）. 14 OF 14...
Need help?
Do you have a question about the HPA34 and is the answer not in the manual?
Questions and answers