Vivo DESK-AC01C-W Manual

A (x2)
M5x16 Screw
Place the top bracket against the desired location under the desktop and mark drilling locations. Drill 1/4" (6.3mm) deep holes using
a 1/8" (3mm) drill bit, then secure the top bracket to the desk using the included screws (A) and a Phillips screwdriver. Assemble the
vertebrae sections to the desired length, then insert cables into the corner openings of the vertebrae sections.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us.
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
White Vertebrae Cable Management Kit for Desk
SKU: DESK-AC01C-W
WARNING!
Open Monday - Friday 7:00am - 7:00pm CST,
We are happy to replace parts to ensure you have a fully functioning product.
AVG. RESPONSE TIME
(within office hrs)
AVG. RESOLUTION TIME
(within office hrs)
AVG. RESOLUTION TIME
(within office hrs)
Scan the QR code with your mobile device
or follow the link for helpful videos and
specifications related to this product.
https://vivo-us.com/products/desk-ac01cw
: 1HR 8M
: < 15 M
: 5M 4S
LAST UPDATED: 04/26/2021
REV1.1