Advertisement
Quick Links
APP
soundcore
Google Play and the Google Play logo are
trademarks of Google Inc.
Apple and the Apple logo are trademarks of
Apple Inc.
Download the soundcore app to adjust EQ settings, experience Gaming Mode, customize touch controls and light
effects, update firmware, and explore more features.
If your earbuds cannot connect with the soundcore app, try re-installing the app or updating it to the latest version
available in your mobile app store.
Click this link to download: http://dl-soundcore.soundcore.com/qcdl?flow=soundcore
OVERVIEW
1
2
3
1. Adjustable Earhook
2. Touch Area
3. Customizable LED Light
4. Charging Contactors
POWERING ON & PAIRING
1
3
1. For first-time use, remove the insulation stickers on the earbuds.
2. Return earbuds to the charging case.
3. Take out the earbuds again. The earbuds will automatically power on and enter Bluetooth pairing mode. Select
"soundcore V20i" on your device's Bluetooth list to connect. During pairing, the LED lights on both earbuds will
flash blue. Once the pairing is successful, the LED lights on both earbuds will stay on for 1 second and then go
off.
Once connected, the earbuds will automatically reconnect to your device every time you open the charging case
and take out the earbuds, as long as you haven't deleted the pairing history from your device.
*Earbuds will only power on when taken out of the case.
4
5
5. Sound Outlet
6. USB-C Charging Port
7. Charging Case Indicator
2
PAIRING
CONNECTED
6
4
1s
soundcore V20i
7
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Anker Soundcore V20i
Summary of Contents for Anker Soundcore V20i
- Page 1 3. Take out the earbuds again. The earbuds will automatically power on and enter Bluetooth pairing mode. Select "soundcore V20i" on your device's Bluetooth list to connect. During pairing, the LED lights on both earbuds will flash blue. Once the pairing is successful, the LED lights on both earbuds will stay on for 1 second and then go off.
-
Page 2: Manual Pairing
3 seconds. At this time, the earbuds will enter pairing mode. PAIRING CONNECTED soundcore V20i DUAL CONNECTIONS Method 1: Using the soundcore App In the soundcore app, tap on the Settings icon located at the upper right corner of the app's interface. Then select Dual Connections >... -
Page 3: Sound Effects
1. Pick up the earbuds and slide the earhook all the way right to the LV4 position (the largest curve). 2. Rotate the earhooks along the auricle of your ear to achieve proper positioning. 3. When you have put on the earbuds, you can slide the earhooks back and forth among four levels until you find the most comfortable fit. - Page 4 TWS mode Mono mode Play / Pause Double tap (R) Double tap Previous track *Customize in soundcore app Next track Double tap (L) Answer Double tap (L/R) Double tap Reject a call/ End a call Tap and hold for 2 seconds (L/R) Tap and hold for 2 seconds Volume up *Customize in soundcore app...
-
Page 5: Powering Off
CHARGING 2.5 hrs 1. Restore the earhooks to LV1 positions, then place the earbuds in the charging case and close it. • Fully dry off the earbuds and the USB-C charging port before charging. 2. Connect the charging case to a power supply by using the provided USB-C charging cable. * A full battery recharge of the charging case takes about 2.5 hours. -
Page 6: When Charging
LED LIGHT GUIDE To Check the Battery Level: 0% -45% 46% -100% When you return the earbuds into the charging case, the charging case indicator will show you the remaining battery of the case: When the battery level ranges from 0% to 45%, the indicator will flash three times and then go off. When the battery level ranges from 46% to 100%, the indicator will stay on for three seconds and then go off. -
Page 7: Firmware Update
FIRMWARE UPDATE You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are outside the charging case until the firmware update is complete. During the update, avoid any usage. - Page 8 Bluetooth range CUSTOMER SERVICE & COMPLIANCE INFORMATION service@soundcore.com support.mea@soundcore.com (For Middle East and Africa Only) support@anker.com ( 日本 ) +1 (800) 988 7973 (US/Canada) +44 (0) 1604 936200 (UK) +49 (0) 69 9579 7960 (DE) 03 4455 7823 ( 日本 ) +86 400 0550 036 ( 中国...
- Page 9 Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti-related.
Need help?
Do you have a question about the Soundcore V20i and is the answer not in the manual?
Questions and answers