Anker Soundcore Liberty 5 Manual
Anker Soundcore Liberty 5 Manual

Anker Soundcore Liberty 5 Manual

Advertisement

APP
soundcore
Google Play and the Google Play logo are
trademarks of Google Inc.
Apple and the Apple logo are trademarks of
Apple Inc.
Download the soundcore app to explore the ambient sound features, EQ settings, Dolby Audio, HearID
sound, firmware updates, and other exciting features.
If your earbuds cannot connect to the soundcore app, try re-installing the app or updating it to the
latest version available in your mobile app store.
OVERVIEW
1
2
1. Ear Tip
• M-size ear tips are pre-installed at the time of purchase.
2. Earbud Control Area
• Squeeze the control area on the earbud stems to manage different functions.
3. Charging Contacts
4. USB-C Charging Port
5. Charging Case Button
6. LED Light Strip
WEARING
1
XXS
XS
S
1. Try different ear tips to find the best fit.
2. Gently place the earbuds into your ear canal and rotate them until they feel snug.
3. Use the fit test in the soundcore app to ensure optimal active noise cancelling performance.
Dust, earwax, or other debris can accumulate in the earbuds. To maintain optimal sound quality, clean
them regularly. Use a slightly moistened cotton swab with rubbing alcohol to gently wipe the metal
mesh filter beneath the rubber ear tips. Make sure the alcohol has completely dried on the metal mesh
filter before using the earbuds again.
3
2
M
L
XL
4
5
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Soundcore Liberty 5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Anker Soundcore Liberty 5

  • Page 1 soundcore Google Play and the Google Play logo are trademarks of Google Inc. Apple and the Apple logo are trademarks of Apple Inc. Download the soundcore app to explore the ambient sound features, EQ settings, Dolby Audio, HearID sound, firmware updates, and other exciting features. If your earbuds cannot connect to the soundcore app, try re-installing the app or updating it to the latest version available in your mobile app store.
  • Page 2 Google Fast Pair: Instantly pair with your Android smartphone (running Android 6.0 or above) using Google Fast Pair. 2. Select soundcore Liberty 5 from your device's Bluetooth list to connect. Once connected, the LED light strip will remain on for 2 seconds before turning off.
  • Page 3 DUAL CONNECTIONS soundcore Liberty 5 Dual Connections is enabled by default. To connect a second device while already connected to one, pinch the control area on both earbud stems for 3 seconds until you hear a voice prompt for pairing mode. Then, proceed to pair with the second device.
  • Page 4 Using Dual Earbuds Using Single Earbud Play/Pause Audio Squeeze Once (L/R) Squeeze Once Play the Next Track Squeeze Twice (R) Squeeze Twice Play the Previous Track Squeeze Twice (L) Answer a Call Squeeze Once (L/R) Squeeze Once Squeeze and Hold for 2 Reject/End a call Squeeze and Hold for 2 Seconds Seconds (L/R)
  • Page 5: Dolby Audio

    DOLBY AUDIO Note: UI images are for illustration only; actual display may vary by software version. Dolby Audio delivers an immersive listening experience by placing sound all around you. You can choose between three Dolby Audio modes in the soundcore app: Music Mode: Delivers immersive, detailed sound for your favorite tunes, making every note and beat clear and vivid.
  • Page 6: Ambient Sound

    Gaming mode and LDAC/Dolby Audio cannot be turned on at the same time. AMBIENT SOUND Note: UI images are for illustration only; actual display may vary by software version. In the soundcore app, you can select from Noise Cancellation, Normal, or Transparency Mode. Noise Cancellation (Level 1 to 5): Optimizes noise cancellation by adjusting to your ears and environment.
  • Page 7 In the soundcore app: 1. Select Sound Mode. 2. Tap Preferred audio quality. 3. Tap Agree to proceed. 4. Switching audio codecs takes about 10 seconds. You may be prompted to update the earbuds' firmware if an update is available. REMOTE PHOTO SNAP ×1 ×...
  • Page 8: Powering Off

    POWERING OFF To power off, return both earbuds to the charging case and close it. When removed from the case, the earbuds automatically power off after 30 minutes if not connected to any device. The duration can be set in the soundcore app. RESET ×3 Place the earbuds in the charging case and leave the case open.
  • Page 9: Customer Service

    The last five 00001-99999 Denotes serial No. Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website:...

Table of Contents