Anker soundcore R50i / P20i / P25i Manual

APP

Download the soundcore app to experience the full range of features such as gaming mode, Find Device, EQ tuning, firmware updates, and more. If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store. Click this link to download: http://dl-soundcore.soundcore.com/qcdl?flow=soundcore

WEARING

Choose the ear tips that fit your ears best.

CHARGING

• Fully dry off the earbuds and the USB-C charging port before charging.
• Fully charge both the earbuds and the charging case before the first use.

1. Tear off the insulation sticker on the earbuds before first use.
2. Place the earbuds in the charging case and close it.
3. Connect the charging case to the power supply by using a certified USB-C charging cable.

POWERING ON & PAIRING

Open the charging case and take the earbuds out of the case. They will automatically power on and enter Bluetooth pairing mode. Select soundcore R50i/P20i/P25i* on your device's Bluetooth list when connecting for the first time soundcore.
*The device name may vary depending on the region.

MANUAL PAIRING

To manually enter Bluetooth pairing mode, take the earbuds out of the case, then tap and hold the touchpads on both earbuds for 3 seconds.

CONTROLS

*You can also customize controls in the soundcore app.

		TWS mode	Mono mode
	Play/Pause	Tap twice (R)	Tap twice
	Previous track	Tap and hold for 2 seconds (L)	/
	Next track	Tap and hold for 2 seconds (R)	/
	Answer/End a call	Tap twice (L/R)	Tap twice
	Reject a call	Tap and hold for 2 seconds (L/R)	Tap and hold for 2 seconds
	Activate voice assistant software	Tap twice (L)	/

POWERING OFF

To power off, return the earbuds to the charging case and close it.
The earbuds will automatically power off after 30 minutes if they are not connected.

RESET

Reset if the earbuds have issues pairing with each other or with other devices.
Delete the pairing history from your Bluetooth device first. Take the earbuds out of the case. Within one minute of the earbuds powering on, tap and hold the touchpads on both earbuds for 10 seconds until you hear a notification sound.

LED LIGHT GUIDE

	Flashing white
	Steady white

FIRMWARE UPDATE

You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is complete. During the update, ensure the earbuds are being charged and avoid any usage.

SPECS

Specifications are subject to change without notice.

Customer Service

service@soundcore.com
support.mea@soundcore.com (For Middle East and Africa Only)
support@anker.com (⽇本)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
03 4455 7823 (⽇本)
+86 400 0550 036 (中国)
+82 02-1661-9246 (한국)
+971 529750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (Australia)
+90 (850) 460 14 14 (Türkiye)
+8 (800) 511-86-23 (Russia)
+91 18003138831 (India)
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.