Danco 88185X Instructions

Instructions
Tools Required:
1. Remove old Shower Head (A) by unthreading Nut
(B) connecting Shower Head (A) to Shower Arm (C).
2. Remove any old pipe sealing tape or grease
and oil from the threads on the Shower Arm (C).
Clean and dry thoroughly.
3. Wrap new pipe sealing tape around threads
(going in the direction of the threads), overlapping 1/2˝ width.
4. Thread new shower head onto Shower Arm (C). Hand tighten and inspect for leaks.
Instrucciones
Herramientas requeridas:
1. Remover la cabeza de ducha usada (A), desenroscando la tuerca (B)
que conecta la cabeza de ducha (A) al brazo de ducha (C).
2. Limpiar toda cinta para rosca, grasa o aceite de la rosca
del braza de ducha (C). Secar bien.
3. Poner nueva cinta en la rosca (en el sentido de la rosca) con un traslapo de 1/2˝.
4. Enroscar la nueva cabeza de ducha en el brazo de ducha (C).
Ajustar a mano y comprobar si hay fugas.
Adjustable Pliers, Pipe Sealing Tape
alicates ajustables, cintas para roscas de tubos
Visit
DANCO.COM
for Easy D.I.Y. Solutions
A C
B
©2013 Danco, Inc.
Irving, TX 75062
Made in Taiwan/Hecho en Taiwan
88185