BUSHWACKER 14093 Manual

STEP 1 – PRIOR TO INSTALLATION
A)
Bushwacker only approves installing the Trail Armor according to
®
these written instructions with the hardware provided. WARNING:
Failure to install according to these instructions will invalidate
the warranty. This includes, but is not limited to using alternative
installation methods, hardware, or materials. DO NOT USE: Loctite,
SuperGlue, or similar products on the hardware or the flares.
B) Fit: Verify the fit of the Trail Armor to vehicle. (Some filing, sanding, or
cutting may be necessary to ensure proper fit).
C) Painting: (Optional) if paint is desired it must be done prior to
installing Trail Armor on vehicle. Clean outer surface with a good
grade degreaser. DO NOT USE LACQUER THINNER OR ENAMEL
REDUCER AS A DEGREASER. Wipe outer surface thoroughly with a
tack rag prior to paint. Application of plastic adhesion promoter for ABS
plastic as per your paint system manufacturer's recommendations is
required. Paint Trail Armor using a high quality enamel, or polyurethane
automotive paint. If painting edge trim (not recommended), use a flex
additive.
Included in Hardware Kit:
1.
2 pcs
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-234-8920 (USA AND CANADA) • FAX 800-438-3788
Jeep Trail Armor
®
Hood Stone Guard
Rear Part #14093
Rev-0 02/05/2019
For complete fitment info visit : www.bushwacker.com
TOOLS FOR EASY INSTALLATION:
• Cleaning Cloth
LIMITED LIFETIME WARRANTY AGAINST
ANY MANUFACTURING DEFECTS
• To claim a warranty, you must provide
Proof of Purchase.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
®