Factory Reset - DigiTech VOCALIST VR Manual

connect a microphone to MIC channel on your mixer and any other instruments to other
connect a microphone to MIC channel on your mixer and any other instruments to other
channels on your mixer.
channels on your mixer.
send lead vocal signal from mixer (via one of the mixer's AUX sends) to the line input
send lead vocal signal from mixer (via one of the mixer's AUX sends) to the line input
of VOCALIST VR. Send other instrument signals from mixer (via a separate AUX send)
of ACCESS. Send other instrument signals from mixer (via a separate AUX send) to
to the VOCALIST VR' AUX input to add reverb to your mix.
the ACCESS' AUX input to add reverb to your mix.
connect stereo outputs of VOCALIST VR to a stereo input or two mono inputs on your
connect stereo outputs of ACCESS to a stereo input or two mono inputs on your mixer
mixer (headphones or amplifier and speakers are needed to monitor audio).
(headphones or amplifier and speakers are needed to monitor audio).
Intelligent Arranger Keyboard with built in speakers
Many keyboards have a stereo AUX input. Send your outputs from the VOCALIST VR to your
Many keyboards have a stereo AUX input. Send your outputs from ACCESS to your keyboard to
keyboard to mix harmonies, your voice, and keyboard arrangements the way you want to hear
mix harmonies, your voice, and keyboard arrangements the way you want to hear them.Connect
them.Connect as follows:
as follows:
audio from mic
to VOCALIST VR
audio from VOCALIST VR
to line inputs on keyboard
connect microphone to front panel MIC input of VOCALIST VR.
connect microphone to front panel MIC input of ACCESS.
connect MIDI out from intelligent/arranger keyboard to MIDI in of VOCALIST VR.
connect MIDI out from intelligent/arranger keyboard to MIDI in of ACCESS. Connect
Connect VOCALIST VR' audio output to the line inputs on your keyboard
ACCESS' audio output to the line inputs on your keyboard
VOCALIST VR will interface with any studio console. The hook up diagram would be the
ACCESS will interface with any studio console. The hook up diagram would be the same as the
same as the Acoustic Performance setup on the previous page.
Acoustic Performance setup on the previous page.
To initialize VOCALIST VR to its state when it left the factory,
To initialize ACCESS to its state when it left the factory, press
press at the same time. The LCD Display will prompt you if you would like to "Confirm
at the same time. The LCD Display will prompt you if you would like to "Confirm Reset".
Reset".
To follow through with the initialization press
ing "Factory Restore". Initialization will overwrite any custom presets you may have created.
VOCALIST VR
MIDI from keyboard
to VOCALIST VR
. The LCD Display will confirm by stat-
7