DigiTech VOCALIST LIVE PRO Manual page 29

Harmony & effects processor
Hide thumbs Also See for VOCALIST LIVE PRO:
Table of Contents

Advertisement

Global I/O Setup Table (Continued)
Harmony/
Reverb/
Delay
Toggle
Harmony/
Reverb/
Delay
Momentary
Lead FX/
Reverb/
Delay
Toggle
Footswitch 1,
Footswitch 2,
Lead FX/
Footswitch 3
Reverb/
Delay
Momentary
Harmony/
Lead FX/
Reverb/
Delay
Toggle
Harmony/
Lead FX/
Reverb/
Delay
Momentary
Low
Gtr Sensitivity
High
Toggles both the Harmony Voices and Reverb and Delay Effects
of the current preset Off and On. The Harmony and Reverb/
Delay buttons light on the front panel indicating the status of
their parameters.
The Harmony Voices and Reverb and Delay Effects are active
while the specified Footswitch is pressed and deactivated when
released. The Harmony and Reverb/Delay buttons light on the
front panel indicating the status of their parameters
Toggles both the Lead Effects and Reverb and Delay Effects of
the current preset Off and On. The Lead FX and Reverb/Delay
buttons light on the front panel indicating the status of their
parameters.
The Lead Effects and Reverb and Delay Effects are active while the
specified Footswitch is pressed and deactivated when released.
The Lead FX and Reverb/Delay buttons light on the front panel
indicating the status of their parameters.
Toggles the Harmony Voices, Lead Effects and Reverb and Delay
Effects of the current preset Off and On. The Lead FX, Harmony
and Reverb/Delay buttons light on the front panel indicating the
status of their parameters.
The Harmony Voices, Lead Effects and Reverb and Delay Effects
are active while the specified Footswitch is pressed and deacti-
vated when released. The Lead FX, Harmony and Reverb/Delay
buttons light on the front panel indicating the status of their
parameters.
Low is the most common setting for Guitar Sensitivity and
should provide the guitar input a healthy signal strength indi-
cated by the Guitar Input Signal LED.
Some older guitars send a low signal strength. If your guitar
doesn't send a strong enough signal to turn the Guitar Signal
LED green, try setting the Guitar Sensitivity to High.
The.Global.I/O.Setup.Menu
23
VL.Pro.Owner's.Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents