DigiTech VOCALIST LIVE PRO Manual page 55

Edit Lexicon® Delay Table (Continued)
Pan is only available when the Tape Delay Type is selected and pans the effect at the
Pan outputs in stereo mode. Negative values pan left, positive values pan right and +0 evenly
distributes the effect to the left and right channels. Range: L -99 to R +99
This parameter controls the amount of smear or signal degradation and frequency loss.
Particularly evident in the Tape Delay, the higher the setting, the more each delay repeat
Smear
loses intelligibility compared to the original signal.
This parameter is only available when the Tape Delay Type is selected.
Range: 0 to 99
High
Delay frequencies below this level are attenuated.
Pass
This parameter is not available when the Tape Delay Type is selected.
Range: Off (-) and 20Hz to 20.0 KHz
Filter
Low
Delay frequencies above this level are attenuated.
Pass This parameter is not available when the Tape Delay Type is selected.
Range: 20Hz to 20.0 KHz and Off (-)
Filter
Ducker Level is the level you want the Delay Signal to be heard at when the Input Signal
is present. This provides attenuation (up to 18dB) of the delay signal while a performer
Ducker
is singing or playing to help provide intelligibility. As the performance pauses, the delay
Level
signal level returns to its normal setting. This parameter is not available when the Tape
Delay Type is selected. Range: -18dB to +0dB
The Ducker feature causes the Delay Repeats to attenuate (or get softer) by the
amount selected in the Ducker Level setting when an Input Signal is present. This allows
Ducker
the delay to remain as an effect, and not clash with the original signal. The higher this
Thresh Ducker Threshold is set, the louder an input signal must be for the ducking to take
effect. This parameter is not available when the Tape Delay Type is selected.
Range: -70dB to +0dB
Ratio is only available when the Ping Pong Delay Type is selected and adjusts the Stereo
Ratio
Ratio (L:R) of the Ping Pong Delay Repeats (echoes) relative to the Delay Tempo.
Range: 1:12 to 12:1
Tap Swap is only available when the Ping Pong Delay Type is selected. Tap Swap works
Tap
in conjunction with the Delay Ratio and indicates the order in which the delays appear
Swap
in the stereo mix. Range: R,L or L,R
The.Edit.Preset.Menu
49
VL.Pro.Owner's.Manual