Table of Contents
Advertisement
The.Edit.Preset.Menu
VL.Pro.Owner's.Manual
the preset name are the function definitions for the Edit/Select knob. Upon Store screen entry,
they are defined as <Edit>-Character and <Select>-Toggle allowing you to change the character
that is currently selected.
2. Turn the Edit/Select knob to change the selected character. The available characters include blank,
numbers from 0-9, capital letter and lower case letters.
3. Press the Edit/Select knob to accept the current character value and change the Edit function to
<Edit>-Position allowing you to select a different character to edit.
4. Press the Edit/Select knob to toggle between the 2 edit functions and repeat the procedure until
the desired preset name is achieved.
5. When the desired preset name is achieved, Press the flashing Store button again.
6. The display will now present you with the Location to Store screen in the User Preset Bank. As
you scroll User Preset Bank locations with the Edit/Select knob, the stored preset names are
displayed in the highlighted area of the Store Screen, while the associated preset number flashes in
the Numeric Display. Note that storing to this User Preset location will overwrite the preset that
is currently stored there with the preset you are now storing.
7. Press the flashing Store button to finalize the Store procedure when the desired User Preset Bank
location is listed.
The.Edit.Preset.Menu
For a depiction of the signal flow of the effects chain, see the Effects Flow diagram in the Block
Diagrams section on page 52.
1. Edit Pre-Effects
The following Preset Pre-Effects are applied in combination with both the Lead Effects and the
Harmony Voices.
Low Cut
Low
Cut
Frequency
Tube
Tube
Preamp
Preamp
Gain
De-Esser
De-Esser
Threshold
28
Low Cut is turned Off or On.
All frequencies below specified Hertz are attenuated. Range: 60Hz to
120Hz
Tube Preamp, which provides mild distortion to give your vocals more
warmth, is turned Off or On.
Adjusts the preamp's gain. Range: 0 to 99
De-Esser is turned Off or On.
Sets the threshold above which to apply more gain reduction to sibilant
sounds. Range: -40dB to +0dB
Table Continued Next Page
Hide quick links:
Advertisement
Table of Contents
