Midi Program Dump Utilities - DigiTech STUDIOVOCALISTEX Manual

Note - Supporting earlier
DigiTech Harmony prod-
ucts: To maintain compati-
bility with earlier products,
the Studio Vocalist EX is
able to receive a single
program dump from a
Studio Vocalist or a
Vocalist Workstation.
Consult the appropriate
owner's manual for dump
procedure.
42
5. Use the Data Wheel to select the desired Song Step option.
6. Press the Utilities button once again to exit; this returns you to the
mode from which you entered.
Song Step Direction can be controlled in various ways. The Studio
Vocalist EX's Song Step Forward messages can be assigned to MIDI
Continuous Controller number 17, or any MIDI note from C -1 to G 9.
Song Step Backward messages can be assigned to MIDI Continuous
Controller 18, or any MIDI note from C -1 to G 9. If MIDI notes are used
to control song steps, be sure to assign unique notes to the forward and
backward directions to avoid conflicts.
The Song Step direction control options are:
CC17 (value equals # of Steps)
•
CC18 (value equals # of Steps)
•
MIDI Notes (any two)
•
To change the MIDI Song Step direction:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu.
3. Press the softkey corresponding to Song.
4. Press the Right Arrow button three times.
5. Use the softkeys to select Forward or Backward direction fields and
the Data Wheel to select the desired controller.
6. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
MIDI Dump Utilities
The Studio Vocalist EX's MIDI Dump Utilities allow you transmit pro-
grams, songs, and utility settings as MIDI system exclusive messages to
other Studio Vocalist EXs, or computer-based sysex (system exclusive)
librarian programs for future retrieval.
To dump a single program to another
Studio Vocalist EX
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu.
The display will read "Press Store to dump SVex program".
3. Press the softkey corresponding to Dump.
4. Use the Data Wheel to select the desired program to dump.
5. Press the Store button to dump the program; the unit will display
"Dumping...completed" after about one second to indicate that the
dump is finished.
6. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
Step forward
Step back
Step forward and back