Way Basics CUBE Manual

CUBE
Included
8 Pins 2 Vertical zBoards
adhesive strips on 2 edges
1 Backer Board 2 Horizontal zBoards
thin and has no adhesive with grooves
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
Watch and Assemble www.waybasics.com/help-cube
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
Fit backboard into horizontal zBoard
1
groove.
Arrange vertical zBoard with grooves
4
facing backboard as shown.
Help and Comments www.waybasics.com/contact
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
Carefully remove the 3M
2
protective layer from adhesive.
Align vertical zBoards to backboard.
5
Place alignment pins
3
in vertical zBoards.
Align horizontal zBoard and press firmly
6
to secure unit together. Visit links below
for more details.
Enjoy building possibilities!
Share and Win www.waybasics.com/share