Way Basics SUPER CUBE Manual

Cube, Cube Plus, and Rectangle Plus
SUPER CUBE
Peel adhesive strips
on vertical zBoards
Included
Double Cube Plus or Double Rectangle Plus
8 Pins 2 Vertical zBoards
adhesive strips on 2 edges
1 Backer Board 2 Horizontal zBoards
thin and has no adhesive with grooves
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
Connect
it will compromise its structural integrity.
With Us
Watch and Assemble www.waybasics.com/help-super-cube
Place pins in each
vertical zBoards
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
1
Carefully remove the 3M
protective layer from adhesive.
3
Align vertical zBoards and backer
board to horizontal zBoard.
talktous@waybasics.com
Help and Comments www.waybasics.com/contact
Align vertical zBoards
to horizontal zBoards
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
Triple Cube Plus or Tribeca
2 2 2
4 Align horizontal zBoard and press firmly to secure
unit together. Visit links below for more details.
Enjoy building possibilities!
Share Your Photos and Win
www.waybasics.com/share
Place alignment pins
in vertical zBoards.
Share and Win www.waybasics.com/share