HUSKY LINERS Weatherbeater 25721 Care And Use Instructions

Thank you for selecting a WeatherBeater® Trunk Liner from Winfield Consumer Products. Your new cargo liner is custom
molded to fit your 4Runner with the standard cargo area. Upon removal from the box your liner will not completely unroll and
lay flat. This is normal and only temporary. Just place the liner on the floor or in the trunk of your vehicle with a weight in each
corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this "relaxing" may take
longer; moving the liner to a heated area will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest way
to clean your liner is with a damp cloth or sponge. If using a cleaner, 409 ® or Glass Plus ® work well. Use of Armor All ® , Son-
of-a-Gun ® or similar items is discouraged as these products make the liner slick.
CARGO LINER INSTALLATION INSTRUCTIONS FOR YOUR
TOYOTA 4RUNNER WITH THE STANDARD CARGO AREA
PART #2572 IS DESIGNED TO FIT 4RUNNER VEHICLES WITH THE STANDARD CARGO AREA. IT WILL NOT FIT
VEHICLES WITH THE OPTIONAL "SLIDING REAR CARGO DECK" OR VEHICLES WITH THE OPTIONAL THIRD
ROW SEATING. PLEASE CONTACT YOUR RETAILER IF YOU HAVE RECEIVED THE WRONG LINER. YOU CAN
ALSO CALL HUSKY LINERS AT 800-344-8759.
THE LINER IS DESIGNED TO ALLOW ACCESS TO THE CARGO TIE-DOWN HOOKS WITH THE LINER IN PLACE.
TO ACCESS THE HOOKS, SIMPLY TRIM AWAY THE MATERIAL FROM THE LOWERED AREA(S) IN THE LINER
LOCATED ABOVE THE TIE-DOWN(S). THESE AREAS ARE SHOWN ABOVE DARKENED. A UTILITY KNIFE
WORKS WELL FOR TRIMMING THESE AREAS.
CARE AND USE INSTRUCTIONS
2572_Installation Instruction.doc
03/10/2010