HUSKY LINERS WEATHERBEATER 2561 Care And Use Instructions

Thank you for selecting a WeatherBeater™ Cargo Liner from Husky Liners. Your new trunk liner is custom molded to fit your
CX-9 and is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean
your liner is with a damp cloth or sponge. If using a cleaner, 409 ® or Glass Plus ® work well. Do not use Armor All ® , Son-of-a-
Gun ® or similar items as these products make the liner slick.
1. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal
and only temporary. Just place the liner on the
floor or in the cargo area of your vehicle with a
weight in each corner (a book works well). After
about 15 minutes, your liner will remain flat. In
colder temperatures this "relaxing" may take
longer; moving the liner to a heated area will
speed the process. At this time check the back of
the liner to make sure all 8 Velcro squares are
installed over the 2 inch circular pieces adhered
to the liner. If any are missing, please check for
them in the packaging.
2. As boxed, the liner is not "split" to allow the 3
row seat backs to fold independently. If you
wish to have this functionality, the seat back
portion can be split down the middle as shown in
the photo. There is a trim groove molded in the
center of the liner to guide trimming.
3. If your seats fold manually you may want to trim
out the two seat back release access openings as
shown. To trim, use the recessed trough around
the inside bottom of the opening. A utility knife
works well for trimming. If you have power
rd
operated 3 row seat backs this step is not
needed.
View the Husky Liner Lifetime Warranty at
WEATHERBEATER
FLOOR LINERS
CARE AND USE INSTRUCTIONS
CARGO LINER INSTALLATION INSTRUCTIONS
FOR YOUR MAZDA CX9
rd
www.huskyliners.com/lifetime-warranty
™
2561 Installation Instruction WL.doc
PT #2561
11_21_2019