Thank you for selecting a WeatherBeater® Trunk Liner from Winfield Consumer Products. Your new cargo liner is
custom molded to fit your 4Runner with 3
and lay flat. This is normal and only temporary. Just place the liner on the floor or in the trunk of your vehicle with a weight
in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this "relaxing"
may take longer; moving the liner to a heated area will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409 ® or Glass Plus ® work well. Use of Armor
All ® , Son-of-a-Gun ® or similar items is discouraged as these products make the liner slick.
CARGO LINER INSTALLATION INSTRUCTIONS FOR YOUR
TOYOTA 4RUNNER WITH THIRD ROW SEATING
YOUR CARGO LINER IS DESIGNED TO ALLOW ACCESS TO THE FACTORY CARGO TIE-DOWN HOOKS WITH
THE LINER IN PLACE. TO ACCESS THE HOOKS, SIMPLY TRIM AWAY THE MATERIAL FROM THE LOWERED
AREA(S) IN THE LINER LOCATED ABOVE THE TIE-DOWN(S). THESE AREAS ARE SHOWN ABOVE
DARKENED. A UTILITY KNIFE WORKS WELL FOR TRIMMING THESE AREAS.
CARE AND USE INSTRUCTIONS
rd
row seating. Upon removal from the box your liner will not completely unroll
2574_Installation Instruction.doc
03/10/2010
Need help?
Do you have a question about the Weatherbeater 25741 and is the answer not in the manual?
Questions and answers