Getting Started; Making Connections; Mono Operation - Amplifier - DigiTech RP150 User Manual

Getting Started

Making Connections

There are several different connection options available with the RP150. Before connecting the
RP150, make sure that the power to your amplifier and the RP150 is turned off. There is no
power switch on the RP150. To turn the RP150 on or off, connect or disconnect the included
PS0913B power supply from the Power Input jack.

Mono Operation - Amplifier

Connect your guitar to the Input of the RP150. Connect a single mono instrument cable from
the Left (Mono) output of the RP150 to the instrument input or effect return on your amplifier.
Set the Amp/Mixer switch to Amp.
NOTE: When using a
guitar amp, it may be best to
connect the Output of the
RP150 to the effect return
of the amplifier.
12
Guitar Amp Input/Effect Return
Left (Mono)
Input
Output
Amp/Mixer
switch set to
Amp.