Enerlites HWOS Manual

In-Wall Occupancy/Vacancy Sensor
Model #: HWOS
The passive infrared sensors work by detecting the difference between heat emitted from the human body
Description:
in motion and the background space. The sensor switch can turn a load on and hold it as long as the sensor detects
occupancy. After no motion is detected for the set time delay, the load turned off automatically. This product has one
relay (equal to Single Pole Switch), also includes adjustable Ambient Light Level.
Features:
Turn lights ON/OFF automatically (Occupancy Mode)

Manual ON / automatically OFF (Vacancy Mode)

Time delay is adjustable from 15 seconds (test mode) to 30 minutes

Neutral wire required

Zero Crossing for long relay life

Adjustable sensitivity settings

Light level is adjustable

Standard decorator wall plate included

Specifications:
Voltage ........................................................................................................120 Vac, 60 Hz
Incadescent ..............................................................................................................500W
Fluorescent .............................................................................................................500 VA
Motor .....................................................................................................................1/8 HP
Time delay ...............................................................................................15 Sec to 30 Mins
Operation temperating ......................................................................................32 F to 131 F
*Coverage Area
Best: 180 sq.ft.
Regular: 450 sq.ft.
Maximum: 700 sq.ft.
15'
7.5'
7.5'
15'
5'
4'
30'
15'
General
Specification