Coway Bidetmega 200E Manual

1
Distance between
mounting holes
Measure the distance between mounting holes on your
toilet. It must be 5.1~7.9 inches (130mm~203mm).
3 Distance from the center
of mounting hole to the front
of the toilet bowl
Measure the distance from mounting hole to the front of the toilet
bowl for choosing Elongated or Round type.
- If it is 17.54 – 19.23 inches, order a Bidetmega E type.
- If it is 16.26 – 18 inches, order a Bidetmega R type.
Check before your purchase!
2
Distance from the center
of mounting hole to the
front of toilet tank
Measure the distance from the center of mounting
hole to the front of toilet tank. It must be more than
1.8 inches (45mm).
4 Power outlet
and toilet bowl type
Please check if there is a
grounded power outlet
near your toilet.
Power cord
(47.2 in.)
(The length of the power
cord is 47.2 inches.)
Please check if the toilet bowl is round and flat.