Sena C1 Quick Start Manual

1.1.0
Downloadable Sena Software
Download the Sena Cycling App at
App Store.
Download the following items at sena.com.
Follow us on Facebook, YouTube, Twitter and Instagram to check
the latest information and helpful tips.
Product Details
Microphone
Speakers
LED Taillight
How To Wear the Helmet
① Position the helmet on your head with the front covering your
forehead.
② Position the strap adjuster centered, just below your ears.
③ Position the helmet low on your forehead with the buckle under
the chin and back against the throat. The straps should fit
comfortably around both ears.
④ After removing the chinstrap pad, adjust the chinstrap tension at
the buckle so the chinstrap is tight and comfortable by pulling the
chinstrap end through the buckle to either tighten or loosen as
needed.
• For more information about "How To Wear the Helmet", refer to
the User's Guide.
Icon Legend
Tap button the specified
TAP
1x
number of times
"Hello"
Basic Operations
Powering On
Volume Up
Checking the Battery Level
Powering On
Phone Pairing
When you initially turn on the Bluetooth system:
①
② Select C1 in the list of Bluetooth
devices detected.
• For more information on phone pairing, refer to the User's Guide.
Using the Phone
Answer a Call
Reject a Call
Music Control
Play/Pause
Track Forward
Bluetooth Intercom
Up to three other people can be paired with the Bluetooth system for
Bluetooth intercom conversations.
Intercom Pairing
There are two ways to pair the Bluetooth system.
Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the Sena Cycling App
without remembering the button operation.
① Pair the mobile phone with the Bluetooth system.
② Open the Sena Cycling App
Menu).
③ Scan the QR code
• Your friend (B) can display the QR code on the mobile phone by
tapping
④ Tap Save and check that your friend (B) is paired with you (A)
correctly.
⑤ Tap Scan (
(C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with
Sena products that use Bluetooth 3.0 or below.
Using the Button
Users (You, B)
①
② Tap the Center Button on either Bluetooth system.
③ Repeat the step above to pair with other Bluetooth systems (C
and D).
Last-Come, First-Served
If a Bluetooth system has multiple paired Bluetooth systems for
intercom conversations, the last paired Bluetooth system is set as the
first intercom friend.
Intercom Pairing Order
A
YOU
Two-way Intercom
Start/End Conversation with the First Intercom Friend D
Start/End Conversation with the Second Intercom Friend C
Start/End Conversation with the Third Intercom Friend B
LED Taillight
Using the Button
LED On and Solid
Day Flash
Blinking
Note: Do not tap the button continuously.
Using the Sena Cycling App
You can control the LED Taillight through the Sena Cycling App.
Configuration Menu
Accessing the Configuration Menu
Navigating Between Menu Options
Execute Menu Options
Troubleshooting
Factory Reset
①
②
③
Fault Reset
Note: Fault Reset will not restore the Bluetooth system to the
factory default settings.
Quick Reference
TYPE
Basic
Operations
Mobile Phone
Music
TYPE
Intercom
LED Taillight
Sena Cycling
Firmware
Sena Device Manager
• Firmware upgrade
• Device configuration setting
Quick Start Guide,
User's Guide
SENA Technologies, Inc.
Customer Support: sena.com
Audible prompt
HOLD
1s
TAP
1x
HOLD
1s
TAP
1x
HOLD
2s
HOLD
1s
HOLD
1s
A
YOU
displayed on your friend (B)'s mobile phone.
> QR code (
) and repeat steps 3-4 to pair with Intercom Friends
A
YOU
enter into Intercom Pairing.
HOLD
5s
TAP
1x
B
1
2
C
3
D
TAP
1x
TAP
2x
TAP
3x
TAP
1x
TAP
1x
HOLD
15s
TAP
or
1x
TAP
1x
HOLD
15s
TAP
2x
TAP
1x
OPERATION
Power on
Power off
Volume up/down
Answer phone call
End/reject phone call
Voice dial
Play/Pause music
Track forward
Track backward
OPERATION
Intercom pairing
Start/end intercom
LED on and solid
Night flash
Day flash
LED off
SMART CYCLING HELMET
QUICK START GUIDE
Google Play Store
Chinstrap Pad
O-Ring
(+) Button
Center Button
DC Power Charging &
Firmware Upgrade Port
Bluetooth System's Buttons
Press and Hold button for the
HOLD
10s
specified amount of time
Powering Off
Volume Down
=
=
=
Blinking
Bluetooth
C1
Pi
Device B
End a Call
Voice Dial
Track Backward
and tap (Smart Intercom Pairing
) on the Sena Cycling
Blinking
Turns blue
Confirms intercoms are paired
A
YOU
Last-Come, First-Served
A
YOU
Night Flash
Blinking
LED Off
SENA
or
Strap Adjuster
Buckle
Chinstrap
(-) Button
Status LED
Pinhole Fault
Reset Button
TAP
1x
TAP
1x
"Phone pairing"
HOLD
2s
HOLD
3s
HOLD
1s
B
C
D
App.
B
"Intercom pairing"
C
D
Intercom Intercom
Friend 1 Friend 2
TAP
1x
TAP
1x
" Configuration menu"
TAP
1x
"Configuration menu"
"Factory reset"
" Headset reset,
good-bye"
BUTTON COMMANDS
or
TAP
1x
HOLD
2s
HOLD
3s
HOLD
1s
HOLD
1s
HOLD
1s
BUTTON COMMANDS
HOLD
5s
TAP
1x
TAP
1x
1.1.0_EN_October2022
ENGLISH
in
stand-by
mode
B
B
Intercom
Friend 3
HOLD
1s
TAP
1x
TAP
1x
TAP
1x
TAP
1x
TAP
1x
TAP
1x