Table of Contents
Advertisement
Other Functions
1. Press the UTILITY button.The Utility button's LED lights.
2. Using the MODE or DRUMS buttons, scroll to the left or right until
red numeric display reflects the current Digital Level.
3. Rotate the DATA WHEEL to increase or decrease the amount of Digital Level boost needed. Range
is from 1-20.
4. Press EXIT to return to the BNX3 presets.
Digital Output Configuration
The BNX3's S/PDIF digital output has several combinations of signal routing possibilities for recording and
performance situations. As with the analog outputs, the BNX3's digital outputs can be independently
configured for more flexibility when using both analog and digital outputs simultaneously. The different
digital output configurations are:
mixed in stereo),
off just after the amp modeling and noise gate),
the digital output).
bass+rec
When using
together at the digital output.
Track™ features.
BNX3's processing. This lets you send an unprocessed bass signal out the digital output while still
monitoring the effects processing through the analog and headphone outputs. You can then bring the
signal back into the BNX3's analog input and hear the same dry bass signal run through each of the
bass amp
presets.
modeling without the Chorus/Mod, Delay, or Reverb effects processing.
BNX3's recorder output is to be sent to the digital output. If you have a live mixer with digital input
capability, you can use this configuration in conjunction with the
Using this combination, the analog outputs send bass processing to an external amplifier setup while the
digital output sends recorder playback to the digital input of the mixer. This gives you the best of both
worlds when using the BNX3's bass processing and recorder live, with high fidelity recorder output
through the mixer and the bass processing through an amplifier at the same time.
To change the BNX3's digital output configuration, follow these steps:
1. Press the UTILITY button. The Utility button's LED lights.
2. Press the MODE or DRUMS button, to scroll to the left or right until
Output configuration setup menu). The display begins flashing between
digital output configuration. Note:
factory.
3. Rotate the DATA WHEEL to change the output configuration.
4. Press the EXIT button to exit.
70
bass+rec
bass dry
(taps the bass signal directly off the input),
, both the BNX3's bass processing and the recorder stereo outputs are mixed
bass dry
bass dry
taps the bass signal immediately off the input before it runs through the
taps the signal off just after the noise gate but gives you all the amp and cabinet
bass+rec
(both BNX3 bass processing and recorder outputs are
recorder
(only the BNX3's recorder output is sent to
bass amp
and
configurations are DigiTech's exclusive Dry
ster bass
is the default digital output configuration set from the
digi
lvl
is displayed. The
bass amp
(taps the bass signal
recorder
is used when only the
analog output configuration.
digi out
is displayed (Digital
digi out
and the selected
Hide quick links:
Advertisement
Table of Contents
