Table of Contents
Advertisement
Tutorial
the Comp/Fretless Row
Turn the Wah Off
You don't use Wah in your preset so, you need to turn the Wah off. To turn the Wah off, do the follow-
ing:
1. Press the EFFECT SELECT DOWN button. The Wah LED lights and the display shows the current
status of the Wah.
2. If the Wah is on, press the STATUS button until the red display reads off (
Turn the Whammy™/Synth Off
You don't want Whammy™ or Synth effects in this preset. To turn these effects off, do the following:
1. Press the EFFECT SELECT DOWN button, and the Whammy™/Synth LED is lit.
2. If the display indicates that either one of these effects is active, press the STATUS button until the
display reads off (Of).
Turn the Stompbox Modeling Off
To turn the Stompbox Modeling off for this preset, do the following:
1. Press the EFFECT SELECT DOWN button until the Stompbox LED is lit.
2. If the display indicates that it is active, press the STATUS button until the display reads off (Of).
Adjust the EQ
The EQ for both the Fuzz Model (Green Channel) and the VNTGASH HyperModel™ ( Red Channel) can
also be adjusted individually here as well as the way described on page 31. Here, you have added control
over the Mid and High frequency centers for greater tone shaping flexibility. To adjust the EQ, do the
following:
1. Press the EFFECT SELECT DOWN button until the Equalizer LED lights. The BNX3 defaults to
the Green Channel EQ adjustments. Therefore, the display briefly reads
2. Rotate the Parameter 1 knob to adjust the Green Channel's Bass enhancement.
3. Rotate the Parameter 2 knob to select the center frequency for the Mid-range.
4. Rotate the Parameter 3 knob to adjust the Green Channel's Mid-range enhancement.
5. Rotate the Parameter 4 knob to select the center frequency for the Treble.
6. Rotate the Parameter 5 knob to adjust the Green Channel's Treble enhancement.
7. Press the AMP Footswitch to select the Red Channel's EQ adjustments.The display briefly reads
and the same knobs adjust the same EQ Parameters for the Red Channel.
34
Cmp/fret Of
If Necessary, Press Status
Button to Turn the Effect Off
Of
).
EQ green
.
red
Hide quick links:
Advertisement
Table of Contents
