Stereo Operation; Direct To A Mixing Console; Bi-Amp Setup - DigiTech GeNetX BNX3 User Manual

Introduction

Stereo Operation

1. Connect the bass to the input of the BNX3.
2. Connect the BNX3's Left Output to the input of one amplifier or channel of a power amp.
3. Connect the BNX3's Right Output to a second amplifier, or to a second channel of a power amp.
4.Turn on the BNX3.
5. Select Stereo as the Output configuration from the Utility menu. See page 66 for more on
selecting the Output configuration.

Direct to a Mixing Console

The BNX3 can be connected directly to the inputs of a house PA system, or a recording console.
1. Connect the bass to the BNX3's input.
2. Connect the BNX3's outputs to the channel inputs of the mixing console.
3.Turn on the BNX3.
4. If the BNX3 is used in Stereo configuration, set the pan controls of the mixer hard left and right,
and select Stereo as the output configuration from the Utility menu. See page 66 for more informa-
tion on selecting the Output configuration.

Bi-Amp Setup

The BNX3 can also run into a Bi-Amped system. You are given the option of using the High and Low
output setup that lets you set the Cross-Over frequency. To select the Bi-Amp setup, do the
following:
8