Advertisement
Quick Links
WESTBRASS
D398R installation
1. Place 792RW-LT washer between bottom of tub and lower fitting.
2. Remove plunger and stopper mechanism by unthreading counter clockwise.
3. Place a thin bead of silicone caulking around bottom of strainer and thread it in
the tub outlet. Draw the strainer against the bottom elbow to pull the 792RW-LT
until firm. Use Pliers or a plug wrench to tighten. Do not over tighten or damage
can occur.
Advertisement
Need help?
Do you have a question about the D398R and is the answer not in the manual?
Questions and answers