Zoom ZDM-1 Manual

ZDM-1
ZOOM DYNAMIC MIC
Features
• Delivers a warm and rich broadcast sound
• Supercardioid polar pattern, high gain before feedback
• High SPL capability
• Hum-bucking coil to reduce interference
• The shock mount within the ZDM-1 also greatly reduces stage
noise and mechanical and environmental vibrations.
• The ZDM-1's all-metal construction makes it very robust.
General Rules for Use
• For the best signal to noise ratio, the distance from the
microphone to the sound source should be as short as
possible.
• The sensitivity of a supercardioid microphone is highest on axis
and lowest at 120 to 135 degrees.
• To reduce crosstalk between microphones, a 1:3 guide line
should be followed: If the distance between microphone A to
the sound source A is "1", then the distance between sound
source A and any other microphone should be more than 3
times.
Speci cations
Type: Dynamic | Polar Pattern: Supercardioid | Frequency Response:
50-18,000 Hz | Sensitivity: -54 dBV/Pa (2.0 mV) | Output Impedance: 200
Min. Load Impedance: 200
Polar Patterns
0°
45°
45°
90° 90°
135° 135°
180°
ZOOM CORPORATION
© 2020 ZOOM CORPORATION Copying or reprinting this manual in part or in whole without permission is prohibited. Product names, registered trademarks and
company names in this document are the property of their respective companies. All trademarks and registered trademarks in this document are for identi cation
purposes only and are not intended to infringe on the copyrights of their respective owners.
| Max. SPL: 135 dB | Connector: XLR-M
Frequency Response
dB
10
0
-10
-20
20 50 100 200 500 1000
FREQUENCY IN Hz
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan zoomcorp.com
Monitor
Loudspeaker (s)
120˚–135˚
|
Furnished Accessories
Pivoting Stand
2000 5000 10000 20000 Hz
Overall Dimension
Ø54 mm (Ø2.13")
Recommended
Loudspeaker Locations
P.A. System
Loudspeaker
180˚
90˚ 90˚
0˚
Threaded
Mount adapter
120˚–135˚
Windscreen
Z2I-4033-01