Related Manuals for Husqvarna 327RD X-series
Summarization of Contents
KEY TO SYMBOLS
Symbol Explanations
Explains the meaning of symbols used in the manual and on the machine for safe operation.
INTRODUCTION
Welcome and Product Overview
Welcomes the customer and provides background on the Husqvarna product.
WHAT IS WHAT?
Clearing Saw Component Identification
Identifies and labels the various parts and components of the clearing saw.
GENERAL SAFETY PRECAUTIONS
Important Safety Information
Crucial initial warnings and general safety advice before operating the machine.
Personal Protective Equipment
Details the mandatory protective gear required for safe operation.
Machine Safety Equipment
Explains the function and checks for the machine's built-in safety features.
Operational Safety Features
Covers stop switch, cutting guard, vibration damping, and quick release safety features.
Locking Nut Safety
Instructions and warnings regarding the safe use and tightening of the locking nut.
CUTTING EQUIPMENT
Cutting Attachment Guidelines
General rules, selection, and maintenance for cutting attachments.
Blade and Cutter Sharpening
Procedures for sharpening grass cutters and blades for optimal performance.
Saw Blade Sharpening
Detailed instructions on how to sharpen saw blades correctly.
Trimmer Head Use
Guidance on selecting and using trimmer heads and cords.
ASSEMBLY
Handlebar Installation
Step-by-step instructions for fitting the handlebar to the machine.
Two-Piece Shaft Assembly
Instructions for assembling and dismantling the two-piece shaft for specific models.
ATTACHING CUTTING EQUIPMENT
Blade Guards and Blades
Procedures for fitting blade guards, grass blades, and saw blades.
Other Guards and Attachments
Guidance on fitting alternative guards and cutting attachments.
HARNESS ADJUSTMENT
Harness Setup and Balance
How to adjust the harness for correct height, balance, and load distribution.
FUEL HANDLING
Fuel Safety and Storage
Essential safety precautions for handling, storing, and transporting fuel.
Fuel and Oil Specifications
Details on the correct types of petrol and two-stroke oil to use.
Fuel Mixing
Step-by-step instructions for correctly mixing petrol and oil.
Refuelling Procedure
Safe procedures for refuelling the machine to prevent fires and spills.
STARTING AND STOPPING
Pre-Start Checks
Essential checks to perform before starting the machine for safety.
Starting and Stopping Procedures
Detailed steps for safely starting and stopping the engine.
Starting Methods
Explains how to start the engine using choke and throttle lock mechanisms.
Engine Stopping
Instructions on how to properly stop the engine using the stop switch.
WORKING TECHNIQUES
General Operation Guidelines
Basic safety rules and general advice for effective operation.
Clearing Principles
Key principles for efficient clearing and working methods.
FORESTRY CLEARING WITH SAW BLADE
Specific techniques for using a saw blade in forestry clearing.
BRUSH CUTTING WITH SAW BLADE
Techniques for cutting brush and small stems with a saw blade.
GRASS CLEARING TECHNIQUES
Methods for clearing grass using grass blades and trimmer heads.
Trimmer Head Cutting
How to cut grass effectively with a trimmer head.
Trimmer Head Sweeping
Using the trimmer head for clearing debris by sweeping.
MAINTENANCE
Carburetor Overview and Function
Explains the carburetor's role, adjustments, and settings.
Carburetor Jet Adjustment
Detailed procedures for adjusting the low speed, high speed, and idle jets.
Start Throttle Speed Adjustment
How to adjust the engine's start throttle speed for proper idle.
Muffler Maintenance
Information on checking, cleaning, and maintaining the muffler.
Cooling System Maintenance
Instructions for cleaning the machine's cooling system.
Bevel Gear Lubrication
Guidance on checking and lubricating the bevel gear.
Air Filter Cleaning
Procedures for cleaning and maintaining the air filter.
Air Filter Oiling
Instructions for correctly oiling the air filter for dusty conditions.
Two-Piece Shaft Lubrication
Details on lubricating the two-piece shaft to prevent seizing.
Spark Plug Service
How to check, clean, and replace the spark plug.
Maintenance Schedule
A comprehensive schedule for daily, weekly, and monthly maintenance tasks.
TECHNICAL DATA
Machine Specifications
Detailed technical specifications for different Husqvarna clearing saw models.
Approved Accessories
Lists compatible cutting attachments and their corresponding guards.
EC Declaration of Conformity
Official declaration of the machine's compliance with EU directives.
Need help?
Do you have a question about the 327RD X-series and is the answer not in the manual?
Questions and answers