Related Manuals for Husqvarna 327R X-series
Summarization of Contents
Key to Symbols
Symbols
Explains the various safety symbols and warning icons used in the manual.
What is What?
Parts Identification
Identifies and labels the components of the clearing saw with a diagram.
General Safety Precautions
Important Safety Information
General warnings and essential advice for safe operation of the clearing saw.
Personal Protective Equipment (PPE)
Details required safety gear including helmet, hearing/eye protection, gloves, boots, and clothing.
Machine Safety Features and Checks
Explains safety equipment like throttle lockout, stop switch, guards, and their maintenance.
Cutting Equipment and Sharpening
Guidelines for using, maintaining, and sharpening cutting attachments like blades and trimmer heads.
Assembly
Handlebar Assembly
Instructions for fitting the handlebar to the machine for different models.
Two-Piece Shaft Assembly
Steps for assembling and dismantling the two-piece shaft on the 327RDx model.
Cutting Equipment Installation
Guides for installing blade guards, grass blades, saw blades, and other attachments.
Harness Adjustment
How to adjust the harness for correct height, balance, and load distribution.
Fuel Handling
Fuel Safety and Storage
Precautions for handling fuel, transport, and storage to prevent fire and hazards.
Fuel Types and Mixing
Information on recommended petrol, two-stroke oil, and correct fuel mixture ratios.
Fuelling Procedures
Step-by-step guide for safely refuelling the machine, including precautions.
Starting and Stopping
Pre-Start Checks
Essential checks to perform before starting the engine to ensure safety and proper function.
Starting Procedure
Detailed steps for starting the engine, including choke usage and primer bulb.
Stopping Procedure
How to safely stop the engine using the stop switch.
Working Techniques
General Working Instructions
Basic safety rules and general advice for operating the clearing saw.
Clearing Methods
Techniques for clearing vegetation using the machine, including systematic work and terrain considerations.
Forestry Clearing
Specific techniques for clearing trees using a saw blade, including felling direction and cutting methods.
Cutting Grass and Brush
Methods for trimming grass, clearing coarse grass with a blade, and brush cutting.
Maintenance
Carburettor Adjustment
Instructions for adjusting the carburettor's low, high, and idle speed jets for optimal performance.
Muffler Maintenance
Care and checks for the muffler, including spark arrestor mesh and catalytic converter.
Cooling System and Air Filter
How to clean and maintain the cooling system and air filter to prevent overheating.
Spark Plug and Shaft Lubrication
Spark plug checks, gap adjustment, and lubrication of the two-piece shaft.
Maintenance Schedule
A comprehensive schedule outlining daily, weekly, and monthly maintenance tasks.
Technical Data
Specifications Overview
Detailed technical specifications for engine, ignition, fuel, weight, noise, and vibration levels.
Approved Accessories
List of compatible cutting attachments and their corresponding guards.
EC Declaration of Conformity
Statement of compliance with EU directives for machinery, EMC, and noise emissions.
Need help?
Do you have a question about the 327R X-series and is the answer not in the manual?
Questions and answers