Eden 20138 Manual

Water faucet
connection
Dual-style mesh lter
(Fine wire mesh / Fine
ABS mesh)
Step 1
- Simply connect knob end to water faucet
or water supply. Connect a garden hose or
water timer to the outlet end of the lter.
m CAUTION m
-For outdoor use with cold water only
-Do not spray near electrical connections
-When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store indoors
This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov
3/4" INLINE WATER FILTER
- Fits most 3/4" hose & pipe connections (including water timers)
Hose
connection
Installation
- Easy to install, remove & clean
- Maximum water pressure: 120 psi
Unique, one of a kind, water ltration device reduces sediment
clogging watering accessories. Easy to clean ltration meshes
with just water. No more wasted time cleaning accessories
extending the life of your watering tools.
Step 2
Clean and inspect the lter:
- Turn the red handle counter-clockwise until the
lter ejects.
Step 3
- Rinse under cold water. Do not use brush or
other tools to remove sediment to avoid damage.
- Reinsert lter by turning clockwise until it stops.
(foolproof realignment to proper position)
20138-EDAMZ