Universal Remote Control PCL-300 Brochure

PCL-300
Archive Configurations on the
Omega
(MX-650)
The PCL-300 is designed to enable the professional installer to archive
configurations programmed on either the MX-650 or the MX-350
remote controls so that the configurations can be reused in the future
without repeating the programming process. Downloading a previously
programmed configuration often provides a better starting point for
programming and speeds customization even if the new system is
slightly different from an archived file. The PCL-300 software
includes a completely blank configuration for each of the remotes.
These blank configurations have all labeling and codes deleted
from all devices and buttons, enabling you to program small
systems without extensive deleting of labels or commands.
The PCL-300 also enables you to update the IR Database in the remote control and to
update the operating system of the remote control itself whenever an improvement is
available. By connecting to the internet, then using the Live Update feature, you can
update the control itself.
The PCL-300 does not enable you to make any changes to an MX-650 or MX-350
configuration via the PC. All programming is done on the remote control. Nor does
the PCL-300 allow you to convert an MX-650 configuration to an MX-350
configuration or vice versa.
COMPLETE
COMPLETE
CONTROL
PC Upgrade Link
and the Osiris
(MX-350)
™