Download Print this page

Universal Remote Control MX-5000 Network Wand Brochure page 9

Wifi color touch screen with haptic feedback
Hide thumbs Also See for MX-5000 Network Wand:

Advertisement

Automatic Backlighting
The integral motion sensor detects any movement of the touch screen and automatically backlights
the screen. The user does not have to press any button to display the screen. Any movement of the
MX-5000 renews the backlighting. Without movement, the touch screen stays lit for 1 to 99 seconds
(programmed by the installer).
Not Just Color, Animated Color!
Powered by a 533MHz ARM9 microprocessor, the MX-5000 is designed for animation. The powerful
central processor enables quick, fluid page transitions and animated macros.
Learn more. Visit URC at www.universalremote.com or explore URC's rich learning
opportunities at www.urccontrolroom.com/LP_training/
MSC-400 Compatibility
The MX-5000 is compatible with the ultra-reliable MSC-
400 "Trigger" protocol, which enables complex macros,
stored in the MSC-400, to be individually triggered with
a single button push on the MX-5000 regardless of the
interference and noise in the environment.
The combination of very narrow transmission of digitally
encoded packets sent THREE times at digital speeds in
milliseconds assures that every button press on the
Double Capacity Lithium Ion Batteries and
Charging Base
The demands of WiFi and high speed transfers coupled with a
large color touch screen raise the demand for power to a new
high. The MX-5000 is equipped with a unique double capacity
Lithium Ion battery, providing over 4 hours of continuous use
before recharging is necessary. Should the MX-5000 be left
on a table, it will remain in standby mode for 9 days without
requiring a recharge.
The attractive charging base offers an ideal angle to use while
charging, so may be placed on or near your chair. In addition,
the MX-5000 offers a power input at the base of the remote,
so that it can be hand held while charging directly from the
power adapter.
MX-5000 is compatible with the MSC-400 Master System Controller
remote will be received by the MSC-400. The MSC-400's
sophisticated error correction circuitry stores all three
packets and compares them. Once two packets are iden-
tified as identical, the MSC-400 goes to work.
This new technology not only increases range, but in-
creases reliability by a vast margin.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MX-5000 Network Wand and is the answer not in the manual?