Universal Remote Control MX-5000 Network Wand Brochure page 3

Engineered
to delight both the
eye and the hand
The MX-5000's bright, vivid color
touch screen is mounted in a remote
control where every surface, every con-
tour, and every button has been designed to
feel "right." Since WiFi 2-way delivers so much
more fun, you'll need twice the battery life of
other products and the MX-5000 delivers it invis-
ibly, without excess weight or bulk. The weight is
perfectly positioned to balance in your hand. Con-
tours are shaped and molded into the back so that
your hand can find the perfect position. The entire rear
is covered with a soft texture that feels perfect against
your palm.
2-Way RS-232 via MRX-1 Network Base Station
The MRX-1 is a true bridge between the network and IR,
RS-232 and relay-controlled devices. In addition, it pro-
vides 2-way status and feedback via RS-232 and a volt-
age/video sensor to network keypads and remotes.
The MRX-1 serves as a "converter" to RS-232 controlled
devices, enabling your MX-5000 to communicate over
the network to an equipment rack located anywhere in
your house. Since the conversion is both ways, your RS-
232 device can be both controlled and can update your
Each MRX-1 controls two 2-Way RS-232 Devices, one relay and up to six IR devices.
MX-5000 with the current status, and display volume pop
ups, tuner interfaces and lists of AVR radio presets etc. all
on the screen of the MX-5000.
In addition, the MRX-1 provides the MX-5000 with control
over relay and IR controlled devices.