Mindeo ME5200 User Manual
  1. Manuals
  2. Brands
  3. Mindeo Manuals
  4. Barcode Reader
  5. ME5200
  6. User manual
Mindeo ME5200 User Manual

Mindeo ME5200 User Manual

Barcode image scanner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ME5200 Barcode Image Scanner
User Manual
Version: ME5200_UM_EN_V1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ME5200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mindeo ME5200

Summary of Contents for Mindeo ME5200

  • Page 1 ME5200 Barcode Image Scanner User Manual Version: ME5200_UM_EN_V1.0.0...

  • Page 3: Table Of Contents

    Contents Contents ..............................i Notes about structure and electric circuit design ................iii 1 Specifications ............................1 1-1 Technical specifications ........................ 1 1-2 Default setting for each barcode ....................3 2 Getting started ............................. 4 2-1 Electrical interface/Pin assignment of cable connector ..............4 2-2 Typical input/output, LDO external, and DC/DC circuitries ............
  • Page 4 3-21 Codabar ............................ 57 3-22 Code 128 ..........................59 3-23 UCC/EAN 128 (GS1-128) ......................61 3-24 ISBT 128 ........................... 63 3-25 Code 93 ............................ 65 3-26 Code 11 ............................ 67 3-27 MSI/Plessey ..........................69 3-28 UK/Plessey ..........................71 3-29 China Post ..........................73 3-30 GS1 DataBar (GS1 DataBar Truncated) ...................

  • Page 5: Notes About Structure And Electric Circuit Design

    Notes about structure and electric circuit design 1. The scanner must be electrically isolated. 2. Leave sufficient space to accommodate the maximum size of the scanner. When selecting any trigger mode, the ambient temperature should not exceed the maximum operating temperature of the scanner. If the temperature exceeds the maximum operating temperature, the performance of the scanner may be reduced, the life of the product may be shortened, and permanent damage may occur to the scanner.

  • Page 6: Specifications

    1 Specifications 1-1 Technical specifications Dimensions L × W × H: 30.2 mm ×16.3 mm × 14.5 mm Weight 4.9 g Indicator To control external Beeper and LED Interface TTL-232, USB Trigger Mode Command, Level, Auto-detection Cable Tapered 12-pin flex strip (12 × 0.5 mm) Programming Method Scanning special barcodes in sequence, or sending commands via TTL-232 interface Firmware Upgrade...
  • Page 7 EMC: EN55032, EN55024 Electrical Safety: EN60950-1 Photobiological Safety: EN62471:2008 Safety RF Immunity: IEC61000-4-3, 10 V/m Artificial Light Immunity: 100,000 Lux...

  • Page 8: Default Setting For Each Barcode

    1-2 Default setting for each barcode Check digit Min. code Read Check digit Proprietary Code type transmissi length enable verification code ID code ID UPC-A √ √ √ (12) UPC-E √ √ √ UPC-E1 √ √ ] E0 EAN-13 √ √...

  • Page 9: Getting Started

    2 Getting started 2-1 Electrical interface/Pin assignment of cable connector Pin No. Signal Name Type Description VCC（+3.3V） Power Power supply: 3.15 to 3.45 VDC. VCC（+3.3V） Power Power supply: 3.15 to 3.45 VDC. Power Power/Signal Ground: 0V reference. Input Received data: TTL-232 serial data receive input port. Output Transmitted data: TTL-232 serial data transmit port.
  • Page 10 The scanner has TTL-232 interface and USB interface to communicate with a host. The following diagram demonstrates the interconnection. VCC(+3.3V) VCC(+3.3V) Scanner Host Scanner and host interconnection via USB Scanner and Host interconnection via TTL-232...

  • Page 11: Typical Input/Output, Ldo External, And Dc/Dc Circuitries

    2-2 Typical input/output, LDO external, and DC/DC circuitries Input: each input IO pin is internally pulled up by a 100K Ohm resistor (VCC=3.3V). Embedded Min. Max. scanner 100K 0.7V -0.3V INPUT 2.4V 3.6V Output: each output port is an open-drain pad with a 100K Ohm pull-up resistor and the maximum sink current is 100 mA (VCC=3.3V).

  • Page 12: Power Management

    2-3 Power management The scanner has two power states (Awake Power state and Sleep Power state). Idle Scanning Sleep Power state (Low Power mode) Awake Power state(Continuous Power mode) Once the scanner is awakened, at least 1 second must elapse before it re-enters sleep state. Two methods of waking-up the scanner are listed in Table 2-1.

  • Page 13: Installation Guide

    2-4 Installation guide 2-4-1 Mounting (Units = mm) Side View Front View Top View Bottom View...

  • Page 14: Fpc Drawings

    2-4-2 FPC Drawings (Units = mm)

  • Page 15: Field Of View

    2-4-3 Field of View Horizontal Field of View Vertical Field of View...

  • Page 16: Scan Window Positioning

    2-4-4 Scan window positioning Instruction: A: Scan Window Distance from Scanner. B: Max. Positive Angle. C: Min. Negative Angle. D: Placing the scan window vertically is feasible? 10mm 0° 0° 0° 0° 0° 0° 0° 7° 11° 27° 28° 0° 0°...

  • Page 17: Notes Of Timing

    2-5 Notes of timing 2-5-1 Timing characteristics Symbol Parameter Conditions Min. Typ. Max. Unit General characteristics Low to high rise time =50pf High to low fall time =50pf Trigger timing Trigger low level hold time trig_1 Trigger high level hold time trig_h Trigger de-bounce time Wake up timing...

  • Page 18: Operation Of Scanner

    2-6 Operation of Scanner The following cases demonstrate how a host operates an scanner quickly and easily. 2-6-1 Request revision ① Host sends WAKEUP command (0x00). ② Host delays 30ms. ③ Host sends a Firmware Version list command (0x16, 0x4D, 0x0D, 0x25, 0x25, 0x25, 0x56, 0x45, 0x52, 0x2E).

  • Page 19: Decode By Commands

    2-6-3 Decode by commands ① Host sends WAKEUP command (0x00). ② Host delays 30ms. ③ Host sends a command (0x16, 0x4D, 0x0D, 0x30, 0x34, 0x30, 0x31, 0x44, 0x30, 0x35, 0x2E) to set Scan mode to Host. ④ Then Scanner responses a <ACK> (0x06) character, and then change Scan mode to Host mode. ⑤...

  • Page 20: Parameter Menus

    3 Parameter menus 3-1 Introduction This section describes the programmable parameters, to change the parameter values. Refer to 3-2 Example 1: Single-parameter setting by scanning 1D barcodes 3-3 Example 2: Multiple-parameter setting by scanning a QR code barcode, scan the appropriate barcodes included in this section, The new values replace the existing values.

  • Page 21: Example 1: Single-Parameter Setting By Scanning 1D Barcodes

    3-2 Example 1: Single-parameter setting by scanning 1D barcodes Important notes: 1. After each successful programming, the scanner will beep twice. 2. Throughout the programming barcode menus, the factory default settings are indicated with asterisks (*). Two programming modes have been provided as bellows: ❶...

  • Page 22: Example 2: Multiple-Parameter Setting By Scanning A Qr Code Barcode

    3-3 Example 2: Multiple-parameter setting by scanning a QR code barcode User can customize a QR code barcode to set multiple parameters. The scanner can set multiple parameters by scanning this single QR code barcode. 1. The data format of the QR code barcode is as following. Note: ...

  • Page 23: Interface Selection

    3-4 Interface selection This scanner supports interfaces such as TTL-232 serial wedge and USB interface. In most of the cases, simply selecting an appropriate cable provided by the manufacturer will work for a specific interface. Interface selection: Auto detection- By setting this function, the scanner will automatically detect the TTL-232 interface or USB interface for user.

  • Page 24: Interface

    3-5 TTL-232 interface XON: 0x11 XOFF: 0x13 ACK: 0x06 NAK: 0x15 Flow control: None - The communication only uses TXD and RXD signals without any hardware or software handshaking protocol. RTS/CTS – If the scanner wants to send the barcode data to the host, it will assert the RTS signal first, and then waits for the CTS signal from the host to perform normal data communication.
  • Page 25 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry None RTS/CTS Flow control Two-direction flow control XON/XOFF ACK/NAK 0 ms 5 ms 10 ms Inter-character delay 20 ms 40 ms 80 ms 00-99 Response delay 00-99 (100 ms) 1200 Baudrate 2400 4800 9600...
  • Page 26 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 19200 38400 57600 115200 None Parity bit Even 8 bits Data bit 7 bits 1 bit Stop bit 2 bits...

  • Page 27: Usb Interface

    3-6 USB interface USB device type: HID keyboard – By setting, the scanner is used as a USB HID keyboard emulation device. USB virtual COM – By setting, the scanner emulates a regular TTL-232-based COM port. If a Microsoft Windows PC is connected to the scanner, a driver is required to install on the connected PC. The driver will use the next available COM Port number.
  • Page 28 Multiple-scan setting Single-scan setting Option bar code Option Alpha. entry HID keyboard HID keyboard for Apple Mac USB device type USB virtual COM Simple COM Port Emulation Turkish F Turkish Q French Italian Spanish Slovak Keyboard layout Denmark Japanese German Belgian Russian Czech...
  • Page 29 Multiple-scan setting Single-scan setting Option bar code Option Alpha. entry Swiss German Portugal 0 ms 5 ms 10 ms Inter-character delay 20 ms 40 ms 60 ms Alphabetic key Numeric keypad Alt + keypad Numeric key BIGS THAI Output non-printing characters USB function code Output function codes corresponding to...

  • Page 30: Scan Mode & Some Global Settings

    3-7 Scan mode & some global settings Scan mode: Good-read off – The trigger pin must be pulled down once to activate scanning. The scanner stops scanning when there is a successful reading or no code is decoded after the Scan standby duration elapsed.
  • Page 31 elapsed. The maximum storage of data is 1000 characters. If this parameter is set to be “00”, the scanner will not store data. And if the parameter is set to be “FF”, the scanner will output data after stopping scanning. Character encoding system: A character encoding system consists of a code that pairs each character from a given repertoire.
  • Page 32 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Good-read off Momentary Alternate continue Scan mode Continue Time-out off Host Auto-detection- Good-read on Auto-detection- Good-read off Barcode detection Disable* Enable Always detection 5 seconds Barcode detection delay 10 seconds 30 seconds 60 seconds Never detection 4 seconds...
  • Page 33 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 10 minutes 15 minutes 20 minutes 30 minutes 45 minutes 1 hour 00-FF Same barcode delay time for 1D symbol 00-FF (50 ms) 00-FF Same barcode delay time for 2D symbol 00-FF (50 ms) Double confirm...
  • Page 34 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Traditional Chinese Windows-1250 KOI8R Japanese Complete data output before Disable next decode attempt Enable Disable Sleep mode Deep sleep Idle mode Shallow sleep...

  • Page 35: Indication

    3-8 Indication Power on alert: After power-on the scanner will generate an alert signal to indicate a successful self-test. Beeper indication: After each successful reading, the scanner will beep to indicate a good barcode reading, and its beep tone duration is adjustable. Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper.

  • Page 36: Decode Illumination Mode And Decode Aiming Pattern

    3-9 Decode illumination mode and Decode aiming pattern Decode illumination mode: Enable illumination causes the scanner to turn on the illumination to aid decoding. Disable illumination to turn off illumination for the scanner during decoding. Better quality images could be obtained with illumination support. The effectiveness of the illumination decreases as the distance to the target increases.
  • Page 37 Multiple-scan setting Single-scan setting Alpha. Option barcode Option entry Always Off Always On Decode illumination mode Flashing On when reading Always off Always on Decode aiming pattern On before reading On when reading Disable decode illumination Level of decode illumination Middle High Always off...

  • Page 38: Single Type Of Barcode, Multi-Symbols, And Vertical Centering Read

    3-10 Single type of barcode, Multi-symbols, and Vertical centering read 1D symbols read: A global setting of 1D symbols readability. 2D symbols read: A global setting of 2D symbols readability. Multi-symbols read: By setting enable, the scanner allows to read multiple symbols in one image. By setting Disable, the scanner will only read the symbol closest to the center area in the image.
  • Page 39 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Follow respective 1D symbol setting 1D symbols read All 1D Disable All 1D Enable Follow respective 2D symbol setting All 2D Disable All 2D Enable Only PDF417 Enable 2D symbols read Only QR code Enable Only Data Matrix Enable Only Aztec Code Enable...

  • Page 40: Note 1 : The Instruction Of Calibrating The Aimer In Vertical Centering Direction

    Note 1 : The instruction of calibrating the aimer in vertical centering direction Scan the barcode on this page. The scanner will give three musical short beeps to indicate entering calibration mode. Press the trigger of the scanner while maintaining the distance of about 15cm between the scan window of the scanner and this paper.

  • Page 41: Note 2: Scan Barcode Or Send Command To Enter Upgrade Mode

    Note 2: Scan barcode or send command to enter upgrade mode Scan barcode to enter upgrade mode Send command 0x16 0x4D 0x0D 0x25 0x4E 0x4D 0x55 0x47 Send command to enter upgrade mode 0x44 0x2E by USB virtual COM or RS232 COM.

  • Page 42: Dpm, Structured Append Symbols, And Mobile Screen Read

    3-11 DPM, Structured append symbols, and Mobile screen read DPM format read: By setting Enable, the scanner can read 2D symbols in DPM (Direct Park Marking) format. Some barcodes in DPM format are shown below. Structured append symbols read: By setting Enable, the scanner will output data only when all Structured Append symbols have been decoded.
  • Page 43 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable DPM format read Enable Disable Structured append symbols read Enable Disable Mobile screen read Enable...

  • Page 44: Upc-A

    3-12 UPC-A Read: Format System character Data digits (10 digits) Check digit Check digit verification: The check digit is optional. Check digit trans.: By setting Enable, check digit will be transmitted. Code ID setting: Code ID is a one-two-character string used to represent the symbol upon a succeeding reading.
  • Page 45 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry None 2 digits Supplement digits 5 digits 2 or 5 digits Read only UPC-A with Supplement digits None Truncate leading zeros Truncation/Expansion Expand to EAN-13 Truncate system character Add country code...

  • Page 46: Upc-E

    3-13 UPC-E Read: Format System character “0” Data digits (6 digits) Check digit Check digit verification: The check digit is optional. Check digit trans.: By setting Enable, check digit will be transmitted. Code ID setting: Refer to Code ID setting of 3-12 UPC-A.
  • Page 47 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry None 2 digits Supplement digits 5 digits 2 or 5 digits Read only UPC-E with Supplement digits None Truncate leading zeros Expand to EAN-13 Truncation/Expansion Expand to UPC-A Truncate system character Add country code...

  • Page 48: Upc-E1

    3-14 UPC-E1 Read: Format System character “1” Data digits (6 digits) Check digit Check digit verification: The check digit is optional. Check digit trans.: By setting Enable, check digit will be transmitted. Code ID setting: Refer to Code ID setting of 3-12 UPC-A.
  • Page 49 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry None 2 digits Supplement digits 5 digits 2 or 5 digits Read only UPC-E1 with Supplement digits None Expand to EAN-13 Truncation/Expansion Expand to UPC-A Truncate system character Add country code...
  • Page 50 3-15 EAN-13 Read: Format Data digits (12 digits) Check digit Check digit verification: The check digit is optional. Check digit trans.: By setting Enable, check digit will be transmitted. Code ID setting: Refer to Code ID setting of 3-12 UPC-A. Insertion group selection: Refer to Insertion group selection of 3-12 UPC-A.
  • Page 51 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 5 digits 2 or 5 digits Read only EAN-13 with Supplement digits Disable ISBN/ISSN conversion Enable 00-FF ISBN/ISSN Code ID setting 00-FF (ASCII) <B>*...
  • Page 52 3-16 EAN-8 Read: Format Data digits (7 digits) Check digit Check digit verification: The check digit is optional. Check digit trans.: By setting Enable, check digit will be transmitted. Code ID setting: Refer to Code ID setting of 3-12 UPC-A. Insertion group selection: Refer to Insertion group selection of 3-12 UPC-A.
  • Page 53 2 or 5 digits Read only EAN-8 with Supplement digits None Truncation/Expansion Truncate leading zero Expand to EAN-13...

  • Page 54: Code 39 (Code 32, Trioptic Code 39)

    3-17 Code 39 (Code 32, Trioptic Code 39) Read: Format Start character(*) Data digits (variable) Check digit (optional) End character(*) Check digit verification: The check digit is optional and made as the sum module 43 of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted.
  • Page 55 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <M>* 00-66 Insert group selection 00-66 Standard...
  • Page 56 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Enable Disable Convert Code 39 to Code 32 Enable Disable Code 32 prefix “A” transmission Enable Disable Trioptic Code 39 read Enable Trioptic Code 39 Disable Start/End transmission Enable...

  • Page 57: Interleaved 2 Of 5

    3-18 Interleaved 2 of 5 Read: Format Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 10 of the numerical value of the data digits. There are two optional check digit algorithms: the specified Uniform Symbol Specification (USS) and the Optical Product Code Council (OPCC).
  • Page 58 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification OPCC Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <I>* 00-66 Insert group selection 00-66...

  • Page 59: Industrial 2 Of 5

    3-19 Industrial 2 of 5 Read: Format Data digits (variable) Max./Min. code length: Refer to Max./Min. code length of 3-17 Code 39 (Code 32, Trioptic Code 39). Code ID setting: Refer to Code ID setting of 3-12 UPC-A. Insertion group selection: Refer to Insertion group selection of 3-12 UPC-A.

  • Page 60: Matrix 2 Of 5

    3-20 Matrix 2 of 5 Read: Format Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 10 of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. Max./Min.
  • Page 61 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <X>* 00-66 Insert group selection 00-66...

  • Page 62: Codabar

    3-21 Codabar Read: Format Start character Data digits (variable) Check digit (optional) End character Check digit verification: The check digit is made as the sum module 16 of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. Max./Min.
  • Page 63 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry ABCD/ABCD abcd/abcd Start/End type ABCD/TN*E abcd/tn*E Disable Start/End transmission Enable Disable Start/End character equality Enable...

  • Page 64: Code 128

    3-22 Code 128 Read: Format Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit trans.: By setting Enable, check digit will be transmitted. Max./Min. code length: Refer to Max./Min. code length of 3-17 Code 39 (Code 32, Trioptic Code 39).
  • Page 65 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <K>* 00-66 Insert group selection 00-66 Disable...

  • Page 66: Ucc/Ean 128 (Gs1-128)

    3-23 UCC/EAN 128 (GS1-128) Read: Format Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit trans.: By setting Enable, check digit will be transmitted. Max./Min.
  • Page 67 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <K>* 00-66 Insert group selection 00-66 Disable...

  • Page 68: Isbt 128

    3-24 ISBT 128 Read: Format “=” or “&” Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit trans.: By setting Enable, check digit will be transmitted. Max./Min.
  • Page 69 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <K>* 00-66 Insert group selection 00-66...

  • Page 70: Code 93

    3-25 Code 93 Read: Format Data digits (variable) 2 Check digit (optional) Check digit verification: The check digit is made as the sum module 47 of all data digits. Check digit trans.: By setting Enable, check digit will be transmitted. Max./Min.
  • Page 71 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <L>* 00-66 Insert group selection 00-66...

  • Page 72: Code 11

    3-26 Code 11 Read: Format Data digits (variable) Check digit 1 (optional) Check digit 2 (optional) Check digit verification: The check digit is made as the sum module 11 of all data digits. Check digit trans.: By setting Enable, check digit will be transmitted. Max./Min.
  • Page 73 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification 1 digit Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <V>* 00-66 Insert group selection 00-66...

  • Page 74: Msi/Plessey

    3-27 MSI/Plessey Read: Format Data digits (variable) Check digit 1 (optional) Check digit 2 (optional) Check digit verification: The MSI/Plessey has one or two optional check digits. There are three methods of verifying check digits, i.e. Mod 10, Mod 10/10, and Mod 10/11. The check digit1 and check digit 2 will be calculated as the sum module 10 or 11 of the data digits.
  • Page 75 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable 1 digit (Mod 10) Check digit verification 2 digits (Mod 10/10) 2 digits (Mod 10/11) Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting...

  • Page 76: Plessey

    3-28 UK/Plessey Read: Format Data digits (variable) 2 Check digits (optional) Check digit verification: The UK/Plessey has one or two optional check digits. The check digit 1 and check digit 2 will be calculated as the sum module 10 or 11 of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted.
  • Page 77 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <U>* 00-66 Insert group selection 00-66...

  • Page 78: China Post

    3-29 China Post Read: Format 11 Data digits Max./Min. code length: Refer to Max./Min. code length of 3-17 Code 39 (Code 32, Trioptic Code 39). Code ID setting: Refer to Code ID setting of 3-12 UPC-A. Insertion group selection: Refer to Insertion group selection of 3-12 UPC-A.

  • Page 79: Gs1 Databar (Gs1 Databar Truncated)

    3-30 GS1 DataBar (GS1 DataBar Truncated) GS1 DataBar Truncated is structured and encoded the same as the GS1 DataBar except that its height is reduced to a 13 modules minimum; while GS1 DataBar should have a height greater than or equal to 33 modules.

  • Page 80: Gs1 Databar Limited

    3-31 GS1 DataBar Limited Read: Format 16 Data digits Code ID setting: Refer to Code ID setting of 3-12 UPC-A. Insertion group selection: Refer to Insertion group selection of 3-12 UPC-A. Conversion: Refer to Conversion of 3-30 GS1 DataBar (GS1 DataBar Truncated).

  • Page 81: Gs1 Databar Expanded

    3-32 GS1 DataBar Expanded Read: Format Data digits (variable) Code ID setting: Refer to Code ID setting of 3-12 UPC-A. Insertion group selection: Refer to Insertion group selection of 3-12 UPC-A. Conversion: Refer to Conversion of 3-30 GS1 DataBar (GS1 DataBar Truncated).

  • Page 82: Gs1 Composite

    3-33 GS1 Composite Note: The support for this feature is available with customized firmware version. GS1 Composite symbol group consists of two components: a linear component, which encodes the item’s primary data; and an adjacent 2D composite component, which contains supplementary data. The linear component will be a traditional symbol of types: GS-128, EAN-8, EAN-13, UPC-A, UPC-E or DataBar.
  • Page 83 symbol are enabled. Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry None (Disable) GS1 composite version enabled GS1-128 Composite, DataBar Composite GS1-128 Composite, DataBar Composite, UPC/EAN Composite...

  • Page 84: Pdf417

    3-34 PDF417 Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 85: Micropdf417

    3-35 MicroPDF417 Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 86: Qr Code

    3-36 QR Code Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 87: Data Matrix

    3-37 Data Matrix Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 88: Han Xin Code

    3-38 Han Xin Code Note: The support for this feature is available with customized firmware version. Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 89: Aztec Code

    3-39 Aztec Code Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 90: Microqr Code

    3-40 MicroQR Code Note: The support for this feature is available with customized firmware version. Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 91: Gm Code

    3-41 GM code Note: The support for this feature is available with customized firmware version. Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 92: Maxicode

    3-42 MaxiCode Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable...

  • Page 93: G1-G6 & C1-C3 & Fn1 Substitution String Setting

    3-43 G1-G6 & C1-C3 & FN1 substitution string setting Format of barcode data transmission: Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Suffix string setting: The <enter> key is represented indifferent ASCII when it is applied by different OS. For a Windows/DOS OS, <enter>...
  • Page 94 %8005H4142 %8101D02 %0407D01% Testing barcode: FN1 substitution string setting: The FN1 character (0x1D) in an UCC/EAN128 barcode, or a Code 128 barcode, or a GS1 DataBar barcode can be substituted with a defined string. Truncate leading G5 string setting: by setting, a defined leading character or string can be truncated. Also a single character can be un-defined.
  • Page 95 %8014H4142% Testing barcode: Multiple characters C3 replacement: By setting, a number of defined characters in the data string can be replaced by other defined characters. The maximum number of characters to replace is 11. Example: Replace all the “A” character in a data string with “B” character; replace “C” with “D”; replace “E”...
  • Page 96 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 0-22 characters 00-FF Prefix string setting None 0-22 characters 00-FF Suffix string setting <ENTER> 0D0A* 0-22 characters 00-FF Preamble string setting none 0-22 characters 00-FF Postamble string setting none 0-22 characters 00-FF Insert G1 string setting none...
  • Page 97 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry A un-defined character <0> Defined times 01-22 Repeat of a G5 character setting Once Un-defined times (All) 1-22 defined characters 01-7F Truncate ending G6 string setting A un-defined character <0> Defined times 01-22 Repeat of a G6 character setting Once...

  • Page 98: G1-G4 String Position & Code Id Position

    3-44 G1-G4 string position & Code ID position Format of barcode data transmission: Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Insert G1/G2/G3/G4 string position: The scanner offers 4 positions to insert strings among the symbol.

  • Page 99: String Transmission

    3-45 String transmission Note: The information in this chapter is closely related to 3-43 G1-G6 & C1-C3 & FN1 substitution string setting. Format of barcode data transmission: Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Prefix transmission: By setting Enable, prefix will be appended before the data transmitted.
  • Page 100 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Prefix transmission Enable Disable Suffix transmission Enable Disable Code name transmission Enable Disable Preamble transmission Enable Disable Postamble transmission Enable Disable Code ID transmission Proprietary ID AIM ID Disable Code length transmission Enable Disable Upper...
  • Page 101 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Lower (whole string) Disable FN1 substitution transmission Enable All-non-printable-character string Disable transmission with string setting Enable Transmit the first N 01-99 data characters only Transmit the last N 01-99 data characters only...

  • Page 102: Serial Communication Interface (Sci)

    4 Serial Communication Interface (SCI) Note: The SCI programming commands can be used in place of the programming barcodes. All communication between the scanner and host occurs over the hardware interface lines using the Serial Communication Interface (SCI). The function of the SCI show as below: Maintain a bi-directional communication interface between the scanner and the host.

  • Page 103: Programming Command Syntax

    4-1 Programming command syntax 4-1-1 Single-parameter setting Format Prefix Parameter index Value Storage Prefix: <SYN> M <CR> (ASCII 0x16, 0x4D, 0x0D). Parameter index: Each parameter has a unique 4-digit index which is similar to the option barcode listed in 6 Parameter Menus, except that there is no leading ‘%’ and ending “M%” in the Parameter index.

  • Page 104: Multiple-Parameter Setting

    4-1-2 Multiple-parameter setting Format Prefix Parameter index 1 Value 1 Parameter index N Value N Storage ··· Prefix: Refer to Prefix of 4-1-1Single-parameter setting. Parameter index 1 to Parameter index N: Refer to Parameter index of 4-1-1Single-parameter setting. D/H: Refer to D/H of 4-1-1Single-parameter setting.

  • Page 105: Start Decode & Stop Decode

    4-1-4 Start Decode & Stop Decode Start Decode Format <SYN> <CR> 0x16 0x54 0x0D Note: Activate the scanner to scan barcodes when Scan Mode is Host. Stop Decode Format <SYN> <CR> 0x16 0x55 0x0D Note: Deactivate the scanner to scan barcodes when Scan Mode is Host. 4-1-5 Return default parameters &...

  • Page 106: Get Image

    4-1-6 Get Image Original Image Ship Format <SYN>M<CR> %OISHP 0x16 0x4D 0x0D 0x25 0x4F 0x49 0x53 0x48 0x50 0x2E An image is taken whenever the scan operation is done. The last image is always stored in memory. The original image can be “shipped” by using the %OISHP command. Down-sampled Image Ship Format <SYN>M<CR>...

  • Page 107: Examples Of Setting And Query Commands

    4-2 Examples of setting and query commands The following examples illustrate how a command should be constructed and transmitted to the scanner. Example 1: Append prefix “1N” to all symbols Step 1: Set Prefix string setting to be “1N”. Look up the parameter table in 6 Parameter Menus and the ASCII table in 11 ASCII table. The target parameter index is “8001”.
  • Page 108 Example 2: Query current scan mode Look up the parameter table in 6 Parameter Menus and the ASCII table in 11 ASCII table. The target parameter index is “0401”. The numeral system is decimal, thus, ‘D’ is used. The value field is filled with ‘?’. Put all above parts and then append a storage indicator ‘.’...

  • Page 109: Enable & Disable "Nr

    5 Enable & Disable “NR” Enable “NR” If it is enabled, while the scanner receives the STOP_DECODE command or fails to decode a barcode within the Stand-by duration time, the scanner will transmit “NR”. Disable “NR” (Default)

  • Page 110: Enable & Disable Configuration By Scanning Barcode

    6 Enable & Disable configuration by scanning barcode Note: The setting of the below two barcodes does affect the operation of scanning the barcodes in 10 Return default parameters & firmware version. Enable configuration by scanning barcode (Default) The default status of the scanner is enabled to scan configuration barcode. Disable configuration by scanning barcode Scan the above barcode to disable scanning configuration barcode, then the scanner will not operate configuration by scanning configuration barcodes, but the data string of configuration...

  • Page 111: Barcode Representing Non-Printable Character

    7 Barcode representing non-printable character Notes to make the following barcode: According to different barcode printing software, the method of printing following barcode is different. If using CODESOFT software, firstly read the information through “Help→Index→Code128→ Special input syntax”. Also refer to ASCII table. For example, if we wish to make “F1” barcode, select “CODE 128”, then select “CODE A”...

  • Page 112: Ascii Table

    8 ASCII table for keyboard wedge for TTL-232 Null Down Left Right PgUp PgDn Home Enter Insert Ctrl+ Delete Alt+ Notes: The 2nd and the 3rd columns above are used for keyboard wedge only. “ & ‘ < > Example: ASCII “A” = “41”.

  • Page 113: Test Symbols

    9 Test symbols UPC-A UPC-E UPC-E1 (Default setting: Disable) EAN-13 ISBN/ISSN EAN-8 Code 39 Code 32 A908765439 Trioptic Code 39 (Default setting: Disable) Interleaved 2 of 5 Industrial 2 of 5 (Default setting: Disable) Matrix 2 of 5...
  • Page 114 Codabar Code 128 UCC/EAN 128 ISBT 128 Code 93 Code 11 (Default setting: Disable) MSI Plessey (Default setting: Disable) UK Plessey (Default setting: Disable) China Post GS1 DataBar (GS1 DataBar Truncated) GS1 DataBar Limited GS1 DataBar Expanded...
  • Page 115 PDF417 12=890ab-+%xyz MicroPDF417 (Default setting: Disable) 0239+-mdo QR code 1234567890ABCD-+()&*%^@#$!XYZ Micro QR Code (Default setting: Disable) 0123456789MicroQR Data Matrix 123890abc-+=&*%^!mdo...
  • Page 116 Aztec Code (Default setting: Disable) 12345678901234567890 Maxicode (Default setting: Disable) [)>196511478400011Z00004951UPSN06X6103581/110NSEATTLEWA...

  • Page 117: Return Default Parameters & Firmware Version

    10 Return default parameters & firmware version Restore Factory Defaults Scan this barcode to restore the factory default values. Write to Custom Defaults Store the current scanner settings as custom defaults. Restore Custom Defaults Restore the scanner’s custom default settings. If no custom defaults were set, restore the factory default values.

  • Page 118: Configuration Alphanumeric Entry Barcode

    11 Configuration alphanumeric entry barcode To finish parameter setting, please scan the bar code below.

Table of Contents